Browse Categories
Search

UL Standard 1200°C Muffle Furnace (12x8x5", 7.2L) with Vent Port & Quartz Window (208-240VAC) - KSL-1200X-UL


In stock
Item Number: KSL-1200X-UL
Transported by LTL Freight (Truck)

Personalization

Upgrade to Eurotherm Temperature controller + USB-to-RS485 cable
KSL-1200X-UL is a CE certified and TUV(UL61010) or CSA  Ready compact muffle furnace that offers 12" x 8" x 5" high purity fibrous alumina chamber, gas inlet and outlet ports and a 30 programmable segments temperature controller and UL / MET / CSA Certified electric components. It is the ideal muffle furnace for preparing samples with the temperatures up to 1100 °C in research and dental labs with maximum energy saving. 
Note#1: KSL-1200X-UL has all electric parts (>24V) upgraded to UL certified part and the furnace is ready to pass to all safety test since 2015-05-26
Note#2: An interlock has been integrated into the furnace structure since 2015-06-09

SPECIFICATIONS




Features
      
  • High purity alumina fiber insulation surrounding the chamber provides maximum energy efficiency. 
  • Heavy duty double layer structure with a cooling fan to keep furnace exteriors safe to touch. 
  • Vent port (22mm) installed on top doubles as an outlet for gas flow.
  • A 0.5" diameter observation window made of quartz glass allows the user to see inside the chamber.
  • A gas fill tube is included which can be installed to replace the observation window
  • A protection latch is installed to prevent accidental explosive damage
  • An interlock is installed to cut off power as soon as the door is open
  • The fibrous heating module is replaceable at low cost ( click pic below right to order )
  • Optional Al203 sample plate can also be ordered for this furnace.
                  
Chamber Dimensions
Power 3.5KW
Voltage 208 -240V Single Phase 50/60 Hz
Note: Power cable included without a plug. Please install a plug by yourself or click link below picture to choose a plug according to your country or your lab requirement

Maxinum Working Temp 1200°C Max continuously
Stability at 1000 °C +/- 0.5 °C
Uniformity at 1000 °C +/- 2.0 °C
Max. Heating Rate 30°C/ min.
Temperature Controller
  • FA-YD518P-AG temperature controller is included.
  • Proportional–integral–derivative control (PID control) and auto-tune function
  • 30 segments programmed with ramping, cooling and dwelling steps
  • Built-in over-temperature alarm and thermocouple failure alarm
  • +/- 1 ºC temperature control accuracy
  • Default DB9 PC communication port
  • MET Certified
Laptop, software & WiFi Control(Optional)
  • Brand new laptop with Microsoft Window 10 and Microsoft Office 2013 (30 days free trial) for immediate use.
  • Labview Based Temperature Control System (EQ-MTS01) enables user to edit temperature profile, manage heat-treatment recipe, record and plot data for MTI furnaces.
  • A wireless remote control provides up to 300 meters operating range.
  • Above features are available upon request at an extra cost (up to $1,000). Please contact us for more information.
  • Note: 
    The software is only compatible with MTI’s Yudian Temperature Controller

        


Temperature controller (optional)


  • MTS02-Y Temperature control software kit (for YD518P series controllers) + 15" laptop package is available at the options bar. Click for the detail information about the MTS02-Y software kit. 
  • You may upgrade the temperature controller to the Eurotherm Temperature Controller which is fully compatible with LabVIEW. This package includes a Eurotherm programmer, a communication cable (RS485 - USB) and a software CD. Click the pic below to view the full spec of Eurotherm temperature controller.           


Gas fill tube
  • Stainless steel tube ( 5 mm Dia ) with flange is included which can be installed as a gas inlet port.
  • Also, the hole can be used as feedthrough to calibrate temperature or measure the electrical property of a sample.
                 
Net Weight 110 Lbs
Shipping Weight 175 Lbs ( shipping by pallet )
Dimensions 
  • Furnace Dimensions: 20'' x 21'' x 21'' (W x D x H)
  • Shipping Dimensions: 36" x 36" x 40" (W x D x H)
Warranty
  • One year limited warranty with lifetime support.  
  • ATTENTION: Any damages caused by the use of corrosive and acidic gasses are not under the coverage of MTI One Year Limited Warranty.


Compliance
  • CE Certified
  • All electric components ( >30V) are UL / MET / CSA certified
  • The furnace is ready to pass NRTL certification at extra cost. (pls click mark below to learn details)                  
Application Notes
  • For preserving the longevity of the furnace components, we recommend the heating rate not to exceed 10 °C /min.
  • The cooling rate shall also not exceed 10 °C /min.
  • This furnace lacks vacuum sealing, toxic or explosive gasses are not recommended for use with this furnace without necessary safety controls and supervision.
  • Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating.
  • Click the pic left to choose a crucible
Operation Instructions


        

Related Products

Shopping Cart
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
Mailing Lists
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop

MTI-UCSD Battery Fabrication Lab


MTI Sponsors the Postdoctoral Awards

Upcoming Shows:
Ceramics Expo May 1 - 3 Cleveland OH Booth 646

AeroMat 2018 May 7 - 10 Orlando FL Booth 1612

233rd ECS Meeting May 13 - 17 Seattle WA Booth 200

Recent Attended Shows:
2018 US-China EVBT Apr 8-10 UCSD San Diego CA

2018 MRS Spring Meeting Exhibit Apr 2 - 6 Phoenix AZ


35th International Annual Battery Seminar & Exhibit Mar 26 - 29 Fort Lauderdale FL


TMS 2018 147th Annual Meeting Exhibition Mar 11 - 15 Phoenix AZ


Click here to see our past conferences

 

Notices
1. Prices listed online are valid for US market and whom pay by credit card only. There will be extra charges for shipping & handling. Price various from country to country.
2. We may add extra charges for paper order and net30 terms due to extra labor cost.
3. The prices listed are subject to change without notice.