Browse Categories

10T Economic Hydraulic Lab Press with Safety Cover - YLJ-10

In stock
Item Number: YLJ-10
Model YLJ-10 is an economic manual pressing machine up to 10 metric tons for materials / chemistry research laboratories to prepare the compound ceramic sample. YLJ-10 has built in Hydraulic jack with auto return function and transparent protection cover. It is suitable to be operated in a glove-box under oxygen and inert gas.


Max Pressure 

  • 10 metric tons Max. 
  • Pressure gauge is built in
Gauge Pressure Value to Force Conversion

Gauge Displayed Pressure Value (Mpa) 20 40 60      80
Force Applied on the Hydraulic Cylinder (Ton) 2.5        5     7.5    10    
  • Notes: 
    • Displayed Pressure Value to Actual Applied Force Conversion: 1 MPa = 0.125 Ton
    • The actual force applied on the Hydraulic Cylinder (Ton) equal to the force applied on your working piece
    • For calculating the actual pressure (MPa) applied on your working piece, please follow the equations in below:
      •           P = T/(πr^2) x g x 10
    • P: Pressure (MPa) applied on your working piece
    • T: Force (Ton) applied on the Hydraulic Cylinder 
    • g: Standard gravity. g ≈ 9.8 m/s2
    • π: ~3.14
    • r: Radius (cm) of the working piece
    • *1 Metric Ton = 1000 kg; 1 MPa ≈ 10 kgf/cm2 
Max Lifting Height 100 mm
Max. open die width  130 mm
Protection Cover
  • Transparent plastic cover for safety.
  • Note: Put dies from the back of cover during operation.
Dimensions of Machine 

Net Weight 20 Kg ( 66 lbs)
Dimensions of Shipment 40" x 25" x 28"
Weight of Shipment 100 lbs
Press Dies (optional) Please click picture below to order  < 1/2" ( 12.7 mm ) ID  Pressing dies with various diameters  at extra cost

  • The pressing machine was quality inspected in the USA, lifetime support is provided
  • One year limited standard warranty (Extended warranty is available up to 5 years at extra cost)
Application Notes

  • The pressing die cannot be used for pressing powder with the particle size < 30 microns. Small particles may slip into the gap between pushing rod and steel sleeve and cause damages to the sleeve during the compression. Ball mill and sieve the powder and apply only the 32~75 microns power to the pressing die to avoid the damages. Please consider using the 3'' Dia. Sieve Set No.200&450 Mesh to separate the 32~75 microns particles from the powder clumps. Please clean the mold via ethanol after the completion of each experiment.
  • Warning: Customers must always wear protection goggles during operation !!!
  • Do not raise the bottom cylinder (piston) more than it's maximum traveling distance.
  • Operate the presser inside the glove box is not recommended

Operation Instructions


No. Descriptions Qty
1 YLJ-10 Laboratory Press with built-in hydraulic jack 1 unit
2 Foot stand on left and right side 1 set
3 Bolts for foot stands 1 set
4 Rocker for Laboratory press 1 pc
5 Operation manual CD 1 pc

Related Products

Shopping Cart
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
Mailing Lists
MTI sponsors MTI-UCSD Battery Fabrication Lab:
MTI-UCSD Battery Fabrication Lab Opening

MTI sponsors MRS and ECS Postdoctoral Award:

MTI Sponsors the Postdoctoral Awards

Upcoming Shows:
BPS 2018 62nd Annual Meeting Biophysical Society Feb 17-21 San Francisco CA Booth 909

2018 SME Annual Conference & Expo Feb 25 - 28 Minneapolis, MN Booth 701

APS March Meeting 2018 Mar 5-9 Los Angeles CA Booth 123

TMS 2018 147th Annual Meeting Exhibition Mar 11-15 Phoenix AZ Booth 500

Recent Attended Shows:
2017 MRS Fall Meeting and Exhibit Nov 26 - Dec 1 Boston, MA

Click here to see our past conferences


1. Prices listed online are valid for US market and whom pay by credit card only. There will be extra charges for shipping & handling. Price various from country to country.
2. We may add extra charges for paper order and net30 terms due to extra labor cost.
3. The prices listed are subject to change without notice.