Browse Categories
Search

1500ºC Compact Muffle Furnace (4.7"x4.7"x 4.7",1.7L) with Programmable Controller - KSL-1500X-S-UL


In stock
Item Number: KSL-1500X-S-UL
Transported by LTL Freight (Truck)

Personalization

Computerized Tool
KSL-1500X-S is a CE certified and is ready to pass TUV(UL61010) or CSA certification compact high-temperature muffle furnace with maximum energy saving. It is an ideal tool for annealing and sintering materials in research or dental labs.
 
SPECIFICATIONS:
Furnace Structure
  • High quality 1700ºC alumina fiber inner insulator and double layer steel outer layer with air cooling fan to keep case temperature below 55ºC
  • The design of drop down door is for loading sample at easy.
  • The gas inlet and venting port are installed for using at oxygen or inert gas enriched atmospheres.
Dimensions
  • Chamber: 120 x 120 x 120mm (4.7" x 4.7" x 4.7 "), 1.7 L
  • Overall: 410 D x 380 W x 620 H mm
        chamber dimension                KSL-1500 overall dimension        
    Chamber Dimensions         Overall Dimensions   

Power
  • AC 208V-240V single phase, 50/60 Hz ( 20A air breaker required)
  • 2.5KW
  • Note: Power cable included, but without the plug. Please install a plug by your own or click link below picture to choose a plug according to your country or your lab requirement

Standard Working Temperature 1400ºC ( Continuous )
Maximum Working Temperature 1500ºC (< 60 minutes)
Heating Rate 0 ~20°C / min (suggestion  =< 10°C)
Temperature Accuracy +/- 1ºC
Temperature Uniformity +/- 2°C over 80 mm (3") @ 1400°C
Heating Elements SiC (4 pcs U shape)
Thermocouple S type
Temperature Controller
  • FA-YD518P-AG temperature controller is included.
  • Proportional–integral–derivative control (PID control) and auto-tune function
  • 30 segments programmed with ramping, cooling and dwelling steps
  • Built-in over-temperature alarm and thermocouple failure alarm
  • +/- 1 ºC temperature control accuracy
  • Default DB9 PC communication port
  • MET Certified
Temperature controller (optional)
  • MTS02-Y Temperature control software kit (for YD518P series controllers) + 15" laptop package is available at the options bar. Click for the detail information about the MTS02-Y software kit. 
  • You may upgrade the temperature controller to the Eurotherm 3504 Temperature Controller which is fully compatible with LabVIEW. This package includes a Eurotherm 3504 programmer, a communication cable (RS485 - USB) and a software CD. Click the pic below to view the full spec of Eurotherm 3504 temperature controller.      
Optional Parts
  • You may order Vent port by clicking picture below-left.
  • You may order alumina crucible by clicking picture below-right.
  • The furnace can be upgraded to 1700C ( Click pic right to order )
               
Net Weight
20 kg
Dimensions 480x400x590 mm
Shipping Weight           
40 Kg
Warranty
  • One-year limited warranty with lifetime support.  (Consumable parts such as sample plates and heating elements are not covered by the warranty, please order the replacement at related products below.)
  • ATTENTION: Any damages caused by the use of corrosive and acidic gasses are not under the coverage of MTI One Year Limited Warranty.
Compliance
  • CE Certified
  • All electric components ( >24V) are UL / MET / CSA certified
  • The furnace is ready to pass TUV(UL61010) or CSA certification at extra cost. ( please click marks below to learn details )
                 
Application Notes
Attention Notes
  • For preserving the longevity of the furnace components, we recommend the heating rate not to exceed 10 °C /min. The cooling rate shall also not exceed 10 °C /min.
  • This furnace lacks vacuum sealing, toxic or explosive gasses are not recommended for use with this furnace without necessary safety controls and supervision.
  • Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating.
  • Performance degradation (i.e. furnace can not reach the maximum temperature 1500°C or it is drawing a higher than normal working current) can be expected due to the use of aged SiC heating elements. It is necessary to replace all the heating elements if the above symptoms were seen. Please order the replacements from the standard package list in below.
Operation Instructions
   
     
    

STANDARD PACKAGE
 P/N  Description  Quantity
 KSL7-00  KSL-1500X High Temperature Muffle Furnace  1 set
 EQ-KSL-1500XS-HEL  SiC Heating Element, 4 pcs installed in furnace  4 pcs
 KSL7-02  S type Thermocouples with Alumina Protection Tube  1 set
 KSL7-03  Al2O3 Sample Plate  1 pcs
 KSL7-04  Al2O3 Furnace Door Block  1 pcs
 KSL7-06  Crucible Clip  1 pair
 KSL7-07  Operation Manual  1 set

Related Products

Shopping Cart
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
Mailing Lists
MTI sponsors MRS Postdoctoral Awards:
MRS Postdoctoral Awards Nomination
 

MRS Past Postdoctoral Award Recipients 


MTI sponsors ECS Battery Division Postdoctoral Associate Research Award 

ECS Battery Division Postdoctoral Awards Nomination 


Upcoming Shows:

253rd ACS National Meeting & Exposition Apr 2 - 6 San Francisco, CA Booth 1921

2017 MRS Spring Meeting & Exhibit Apr 17 - 21 Phoenix, AZ Booth 516

Ceramics Expo Apr 25 - 27 Cleveland, OH Booth 1242

231st ECS Meeting May 28 - June 2 New Orleans, LA Booth 312

Recent Attended Shows:

APS March Meeting 2017 March 13 - 16 New Orleans LA

TMS 2017 146th Annual Meeting & Exhibition Feb 26 - Mar 2, San Diego, CA

Click here to see our past conferences

 

Notices
1. Prices listed online are valid for US market and whom pay by credit card only. There will be extra charges for shipping & handling. Price various from country to country.
2. We may add extra charges for paper order and net30 terms due to extra labor cost.
3. The prices listed are subject to change without notice.