Browse Categories
Search

1650°C (3000°F) Hi-Purity Alumina Adhesive for Bonding and Repairing High Temperature Furnace - EQ-CAA-2-LD


Sale Price: Starting at USD$35.95
If you are international, please click this.

Product Options

container size:
FEATURE
  • High Temperature Stability to 1650 °C
  • Withstands Water and Steam after curing
  • Safe to Use -  Non-Flammable
  • Excellent Thermal Shock Resistance
  • Low Shrinkage, High Strength
  • Available - Off the Shelf 
  • Single Part System
  • Made in USA

How to use

  1. Stir and mix thoroughly.
  2. Apply for bonding and protecting thermocouples, heat sensors, critical heating elements, laminating, coating at elevated temperature.
  3. Offer high bond strength, solvent and electrical resistance.
  4. Bonding alumina, metals, ceramics, graphite, and glass.
  5. Air dry 4 hours minimum.
  6. Post cure 2 hours at 150oF (65oC) followed by 4 hours at 392oF (200oC) for additional moisture resistance.
  7. It is excellent for repairing inside the chamber of MTI Box furnances.
           Note
  • This product is pre-mixed. No additional thinner and hardener is necessary.
  • Please don't use it as refractory coating for fibrous ceramic board, which may cause surface cracking.  
  • For coating please choose   1760C (3200F) Hi-Purity Alumina Coating at related product below
  • Routine stir is necessary after open box.
  • Shelf life:  6 months at room temperature

Physical Properties

  • Max. Use Temp.                  3000°F  ( 1650°C)
  • Base Al2O3
  • Compressive Strength:         3,000 psi
  • Flexural Strength                  1,100 psi
  • Dielectric Strength                200 volts/mil
  • Specific Heat:                      0.24 BTU / # oF
  • Volume Resistance              10^8
  • Thermal Conductivity           15.0 BTU in/hr. oF ft.2
  • Thermal Expansion:             4.5 x 10-6/ F
  • Color :                                 White
  • Consistency:                        Creamy Paint

 Material Safety Data Sheet

Related Products

Shopping Cart
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
Mailing Lists
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop

MTI-UCSD Battery Fabrication Lab


MTI Sponsors the Postdoctoral Awards

Upcoming Shows:
AiMES 2018 Sept 30 - Oct 4 Cancun Mexico

Furnaces North America Oct 8-10 Indianapolis, IN Booth 242

MS&T 2018 Oct 14-18 Columbus OH Booth 513

Recent Attended Shows:
Zhejiang University MSE Visiting August 10th Richmond CA

ICM 2018 July 16-20 San Francisco CA


ICT 2018 July 1-5 Caen France


AABC 2018 June 4-7 San Diego CA

Click here to see our past conferences

 

Notices
1. Prices listed online are valid for US market and whom pay by credit card only. There will be extra charges for shipping & handling. Price various from country to country.
2. We may add extra charges for paper order and net30 terms due to extra labor cost.
3. The prices listed are subject to change without notice.