Browse Categories
Search

1700°C Three Zone 60mm Alumina Tube Furnace with Gas Mixer & Vacuum* System - GSL-1700X-60-III-F3LV


In stock
Item Number: GSL-1700X-60-III-F3LV
Transported by LTL Freight (Truck)

Personalization

Upgrade to Eurotherm Temp Programmer (three zone) Upgrade + 15" Laptop + Accessories Kit

GSL-1700X-60-III-F3LV  is a CE certified three zones tube furnace with 60mm Dia. alumina tube, mechanical vacuum pump and three channels gas flowing system, which can heat sample to 1700°C and achieve vacuum degree up to 5x10^-2 torr and mix 1- 3  type of gases for CVD or diffusion. This furnace system also includes an anti-corrosive Pirani Capacitance Diaphragm Gauge to enable vacuum measurements with aggressive gases.

SPECIFICATIONS

 Furnace Structure
  • Double layer steel casing with air cooling. Two cooling fans inside to keep the temperature of outside case < 55oC.
  • High purity fibrous alumina insulation for Max, energy saving.
  • Three independent heating zone via three precision temperature controllers.
  • Click picture on left to review detail specification

Thermal Block Placement
      
Power Consumption
 10 KW 
Input Voltage
 AC 208-240V Single Phase, 50/60 Hz (75A air breaker required)
Heating Zone

Three zones: total 25" (630 mm) heating zone (included two refractory separators)

  • Zone 1: 7.5" (190 mm) heated by 4 pcs U type SiC
    • Working temperature  800 - 1400°C
    • Heating rate: 10°C/min
  •  Zone 2: 10" (250 mm) heated by 6 pcs U type MoSi2
    • Working temperature 800 - 1700°C
    • Max. Heating rate: 5°C/min
  • Zone 3: 7.5" (190 mm) heated by 4 pcs U type SiC
    • Working temperature  800 - 1400°C
    • Max. Heating rate:  10°C/min

Tube Size and Flange

  • 99.8% purity Alumina Tube
  • 2-3/8" ( 60mm) O.D.x 2-1/8"I.D. (54mm) x 48" (1200mm) Length
  • 60 mm stainless steel vacuum sealing flange with valve and meter is included
  • Two porous ceramic blocks are included for protecting flange from heating radiation
Temperature Controller
  • Three precision temperature controllers to control three zones separately.
  • PID automatic control via SCR (Silicon Controlled Rectifier) power control with phase angle fired, current limiting resistor.
  • 30 programmable segments for precise control of heating rate, cooling rate and dwell time.
  • Built-in overheating & broken thermocouple protection.
  • Over temperature protection and alarm allows for operation without attendant(s).
  • +/- 1 ºC temperature accuracy.
  • RS485 Communications Port.
  • Optional:  
    • The furnace may be operated by PC by installing three control modules. Please order the MTS-02 control modules at extra cost. 
    • If you order the PC control module together with the furnace, we will install and test it before shipping. We recommend you to order a computer laptop from us to avoid software installation problems. For more information please click here.

                            
                  

Vacuum Gauge

Vacuum pressure gauges
Vacuum Pump
 
  • Heavy Duty Rotary Vane Vacuum Pump (7.8 CFM -240 L/m) with Two Stage Exhaust System installed inside the vacuum station. The vacuum system can reach 5x10^-2 torr within 30 minutes of pumping. ( 220V is available for the outside USA)
  • One KFD25 adaptor is installed to flange for connecting to vacuum pump.
  • Stainless steel pipe ( 25mm Dia x 1000mm length ) is included for connecting to tube furnace with KFD25 adaptor and clamps.
Option: For precise control of the vacuum pressure, we recommend you choose our turn-key solution EQ-VPC-MV. This is a vacuum pressure regulating system with motorized valve and gauge. It controls pressure range from 10^-6 torr ~ 760 torr.

Three Channel Gas Mixing and Delivery System

  • Three gas flow-meters ( 4% accuracy FS) are installed inside mobile case which are able to monitor gases flowing rate (three different kinds of gases in total)  click picture on left to see detail specs
          1) Compact direct read flow meter, 10-100 cc/min.
          2)
Compact direct read flow meter, 16-160 cc/min.
          3)
Compact direct read flow meter, 25-250 cc/min.
  • One pressure meters is installed inside mobile cart which are able to monitor the pressure of mixing tank.
  • 4 stainless steel needle valves are installed on the mobile cart
  • Two gas flowing pipes are provided for immediately use (one pipe from two mixed gases and another is independent gas) 
  • Optional:  in order to control gas delivery accurately, you may choose three channel gas delivery system controlled by precision digital mass flow meter at extra cost.  Click picture below to see detail specs
Oxygen Monitoring
An Oxygen Sensor can be used to monitor the oxygen level of gas(es) used in CVD systems for preventing or reducing oxidation. Please click the picture below to learn more:
        
Power Cable & Plug
  • 10 feet length 8-3 AWG heavy duty UL approved power cable is included
  • Extra length cable can be ordered by clicking picture on left
  • Plug is not included, you can order from your local hardware store according to female plug in your lab
Dimensions
  • Furnace:   863 L x 457 W x 711 H mm (34 L x 18 W x 28 H  inch)
  • Gas cart:  850 mm (L) x 600 mm  (W) x 700 mm ( H)
Net Weight
150Kg (furnace) + 100Kg  ( total  550lb)
Shipping Weight
800 lbs
Shipping Dimensions
Two cases in one pallet: 45x45x35/case
Warranty
One year limited manufacturer's warranty (Consumable parts such as processing tubes, O-rings and heating elements are not covered by the warranty, please order replacements at related products below).
Compliance
  • CE Certified
  • UL / MET / CSA Certification is available upon request, additional charges will apply
  • Temperature controller is MET and CE Certified
  • Transformer is UL Certified
                       
Application Notes
  • The tube furnaces with alumina tube are designed for using under vacuum and low pressure < 0.02 Mpa / 0.2 Bar/ 3 PSI 
  • Never use graphite crucible in alumina tube.
  • Attention: A two-stage pressure regulator must be installed on gas cylinder to limit the pressure to below 3 PSI for safe operation. Click here to learn the installation of a gas regulator.
  • The flow rate for gases should be limited to < 200 SCCM ( or 200ml/min )
  • Vacuum limit definition for all alumina tube furnaces: * Vacuum pressures may only be safely used up to 1500°C
Operation Instructions
        

Related Products

Shopping Cart
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
Mailing Lists
MTI sponsors MTI-UCSD Battery Fabrication Lab:
MTI-UCSD Battery Fabrication Lab Opening


MTI sponsors MRS and ECS Postdoctoral Award:

MTI Sponsors the Postdoctoral Awards

Upcoming Shows:
BPS 2018 62nd Annual Meeting Biophysical Society Feb 17-21 San Francisco CA Booth 909

2018 SME Annual Conference & Expo Feb 25 - 28 Minneapolis, MN Booth 701

APS March Meeting 2018 Mar 5-9 Los Angeles CA Booth 123

TMS 2018 147th Annual Meeting Exhibition Mar 11-15 Phoenix AZ Booth 500

Recent Attended Shows:
2017 MRS Fall Meeting and Exhibit Nov 26 - Dec 1 Boston, MA

Click here to see our past conferences

 

Notices
1. Prices listed online are valid for US market and whom pay by credit card only. There will be extra charges for shipping & handling. Price various from country to country.
2. We may add extra charges for paper order and net30 terms due to extra labor cost.
3. The prices listed are subject to change without notice.