Browse Categories
Search

1700°C Tube Furnace with Precision Vacuum Pressure Regulating System (E-5 torr) - GSL-1700X-PRY-UL-LD

Click to enlarge
Sale Price: Call or email for pricing
If you are international, please click this.
In stock
Item Number: GSL-1700X-PRY-UL-LD
Transported by LTL Freight (Truck)

Personalization

* denotes required field

Upgrade to Eurotherm Temp. Controller
Select the tube size*

GSL-1700X-HV series furnace consists of a high-temperature alumina tube furnace and a high vacuum system. 

It can be heated up to 1700°C by a different type of MoSi2 heating elements and achieve vacuum pressure up to 10^-5torr with a diaphragm pump. It is widely used for material or chemical lab to sinter all types of new material samples under vacuum or other gas conditions. The temperature of GSL1700X tube furnace is controlled by 30 segments programmable high precision SCR power controller with accuracy +/-1°C.

 
Specifications
Structure     
    Standard System Structure                Alternative System Structure (Please email for quote)
System Working Range From standard atmosphere to <E-5 mbar (under Cold Condition only; with special tube block) 
(Noted: Please don't use high vacuum if the temperature is over 1500 °C)
Motorized Valve

  • Flange in and out: DN 16 ISO-KF
  • Ambient temperature: 5-40 °C (41-104 °F)
  • Gas flow controllable range: 3.75×10E-6~937.5 Torr l/s 
  • Operating pressure: 7.5×10E-9 to 1875 torr
  • With integrated motor control electronics
  • Fluoroelastomer Dosing sleeve
  • The motorized Valve is used together with a control unit for controlling the pressure in a vacuum system, with a variable gas flow (upstream control) for maintaining a desired vacuum pressure. More specifically, the control valve regulates the gas inlet of the vacuum system.
  • The valve plate moves in closing direction when the pressure in the vacuum system rises, vice and verse.
                     
                       Upstream control Solution
Furnace Furnace structure Double layer steel casing with air cooling. Two cooling fans inside to keep  case temperature < 55°C
Tube Materials 99.8% High purity Al2O3 Ceramic
Tube Size Please select the tube size in the options bar.
82mm O.D Alumina tube  ---------- ID: 73mm; OD: 82 mm in diameter  x 1000 mm length
101mm O.D Alumina tube ---------
ID:92.10mm x OD: 101.60 mm x 1000 mm length.
Refractory lining 1750 grade fiber alumina cast
Heating element 1700 grade MoSi2 
Working Temperature 1700°C (2912°F) Max.  <1hr
1600
°C continuously
Normal Working Temperature 800 -1700°C (2732°F)
Temperature Controller
MET certified 30 programmable segments for precise control of heating rate, cooling rate and dwell time.
Built in PID Auto-Tune function with overheating & broken thermocouple protection.
Over temperature protection and alarm allows for operation without attendant(s).
+/- 1 ºC temperature accuracy.
RS485 Communications Port.
  • Advanced Temperature Control (Optional)
  • MTS02-Y Temperature control software kit (for YD518P series controllers) + 15" laptop package is available at the options bar. Click for the detail information about the MTS02-Y software kit. 
  • You may upgrade the temperature controller to the Eurotherm 3504 Temperature Controller which is fully compatible with LabVIEW. This package includes a Eurotherm 3504 programmer, a communication cable (RS485 - USB) and a software CD. Click the pic below to view the full spec of Eurotherm 3504 temperature controller. 
            
Max. Heating / Cooling Rate 5°C / min above 1200°C and 10°C/min below 1200°C
Heating Zone 457 mm (18")
Constant Temperature Zone    150 mm (6")  (+/- 1°C at 1600°C  )
Temperature Accuracy +/- 1°C
Power Input
Single Phase, 220V AC, 50/60 Hz
Power Output
Max. 5KW
High Vacuum Station
Structure
Mobile cart size:  600 (L) x 600 (W) x 700(H), mm
Max. Loading:       600 Lbs on top
Molecular pump control Panel :   LCD digital
Inside:   Pfeiffer vacuum pump  made in Germany
Vacuum sensor is included
Vacuum sensor
Two vacuum gauges are installed in this system.
1. Mechanical vacuum gauge

2. High vacuum gauge (measuring range 10^-8 mbar ~ 10^3 mbar) is installed in the whole high vacuum system for monitoring the high vacuum status when operating the furnace with HV station support.
Control Panel
One button operation - the diaphragm pump and the turbo molecular pump will start after pressing "start" button.
System controlled spinning speed - the controller will control the speed of the turbine spinning up and down according to the vacuum level and leaking rate of the reaction chamber.
Self-protection - the system will protect the pump from damage by overheating and overcurrent if the leaking rate of the reaction chamber is too high to achieve a high vacuum.
LCD screen - double lines parameters checking interface
make the working easier to be handled.
Self-testing
Spinning up Error report
Voltmeter
 Full speed
Volume Flow Rate Nitrogen   N2     33 L/s
Helium      He     39 L/s   (2340L/minute)
Hydrogen H2   32 L/s
Working Range From 1000 mbar to <1E-5 mbar (under Cold Condition only; Noted: Please don't use high vacuum if the temperature is over 1500 °C)
Ultimate Pressure <1E-6 mbar (without any leaking)
Power Input
110V AC or 220V AC switchable, 50/60Hz
Power consumption Duration/Max power: 100/110Watt
Shipping Info Product Dimension Tube Furnace: 550 L x 450 W x 670 H  mm (21.7" L x 17.7" W x 26.4" H)
Mobile bench with vacuum system: 600 x 600 x 700mm
Net  Weight Furnace: 150 kg (330 lbs)
Mobile bench with vacuum system: 50 lbs
Shipping dimension
Two Cases of 47" x 45" x 45"(1200L x 1150W x 1150Hmm)
Shipping weight
450 Lb (175kg)
Warranty
One year limited warranty (Consumable parts such as processing tubes, o-rings, and heating elements are not covered by the warranty, please order the replacement at related products below.)
Compliance
  • CE Certified
  • All electric components ( >24V) are UL / MET / CSA certified
  • The furnace is ready to pass TUV(UL61010) or CSA certification at extra cost. (please click marks below to learn details)
                       
Note
Operation Instructions
Shopping Cart
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
Mailing Lists
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop

MTI-UCSD Battery Fabrication Lab


MTI Sponsors the Postdoctoral Awards

Upcoming Shows:
MS&T 2018 Oct 14-18 Columbus OH Booth 513

2018 MRS Fall Meeting and Exhibit Nov 25 - 30 Boston MA Booth 901

APS March Meeting 2019 March 4-8 Boston MA

Recent Attended Shows:
Furnaces North America Oct 8-10 Indianapolis IN

AiMES 2018 Sept 30 - Oct 4 Cancun Mexico


Zhejiang University MSE Visiting August 10th Richmond CA


Click here to see our past conferences

 

Notices
1. Prices listed online are valid for US market and whom pay by credit card only. There will be extra charges for shipping & handling. Price various from country to country.
2. We may add extra charges for paper order and net30 terms due to extra labor cost.
3. The prices listed are subject to change without notice.