Browse Categories
Search

30T Desktop Electric Hydraulic Laboratory Press with Precision Pressure Controller - YLJ-E30T


In stock
Item Number: YLJ-E30T
Transported by LTL Freight (Truck)
YLJ-E30T is a CE Certified and UL Ready electric hydraulic pressing machine with pressure capability up to 30 metric tons for the fast and easy preparation of compound or ceramic samples.YLJ-E30T has a built-in 24VDC electric hydraulic pump with precise pressure controller to keep pressure in constant automatically. It is an excellent tool for material / ceramic / chemistry laboratories to make larger pellet samples, and can be used under Ar atmosphere.

SPECIFICATIONS:

Normal Working Pressure Range         
  • 0 ~ 30 Metric Tons 
Gauge Pressure Value to Force Conversion
YLJ_30AH_door_open
  • Displayed Pressure Value to Actual Applied Force Conversion: 1 MPa = 0.5 Ton
  • The actual force applied on the Hydraulic Cylinder (Ton) equal to the force applied on your working piece
  • For calculating the actual pressure (MPa) applied on your working piece, please follow the equations in below:
  • P = T x g x 10/ (πr^2)
      • P: Pressure (MPa) applied on your working piece
      • T: Force (Ton) applied on the Hydraulic Cylinder 
      • g: Standard gravity. g ≈ 9.8 m/s2
      • π: ~3.14
      • r: Radius (cm) of the working piece
Pressure Stability
  •  1 MPa / 5 min
Power
  • Universal Power Adapter 100-240 VAC 120 W (UL Certified)
  • 24 V, 90 W DC Motor
Electric Hydraulic Pump
and Digital Pressure Controller
  • Pressure controller with digital display (0.1 Ton accuracy)
  • Two Modes of pressure control
    • Pressure load will stop when pressure reaches pre-setting point
    • Automatic pressure maintaining with "Pressure Maintaining" Mode
Hydraulic Cylinder Travel Distance
  • 0 ~ 20 mm
Working Stage Size
  • 108 mm Dia.
Working Space Size
  • 135 mm L x 135 mm W x 140 mm H

Protection Cover
  • Transparent plastic door for safety
  • Note: Must close the protection door and the pressure releases valve before pressing
Dimensions of Machine 
&
Working Space
 YLJ_30AH_size.jpg
    
        380 mm L x 180 mm W x 350 mm H
     D1=138mm  
     D2=113mm  
     D3=135mm  
     H1=153mm  
     H2=133mm  
Net Weight
  • 66kg
Shipping Weight & Dimensions
  • 190 lbs
  • 40"x30"x26"
Pressing Dies
  • Pressing dies with various diameters are available upon request at extra cost (Click the picture below to order)
              Die-450w.jpg
Warranty
  • The pressing machine was quality inspected in the US. Lifetime support is provided
  • One year limited standard warranty (Extended warranty is available up to 5 years at extra cost)
Compliance
  • CE Certified
  • The pressing machine is ready to pass UL or CSA Certification at extra cost
                   
Application Notes
  • Check the Oil Level regularly using the included oil dipstick. Add AW 46 Hydraulic Oil if the Oil Level when low.
  • The pressing die cannot be used for pressing powder with the particle size < 30 microns. Small particles may slip into the gap between the pressing rod and the sleeve, and cause damages to the sleeve during the compression. Ball mill and sieve the powder with 200 - 450 mesh (30 ~ 80 microns). Apply only the power within this range to avoid the damages. Please consider using the 3'' Dia. Sieve Set No.200&450 Mesh (Click the picture below to order) to separate the 30 ~ 80 microns particles from the powder clumps. Please clean the mold using ethanol after each use
             SieveBrass.jpg
  • Do not raise the bottom cylinder (piston) more than it's maximum traveling distance. (20 mm)
  • Caution: Operator must always wear protection goggles during operation!
  • Operating the press inside a glove box is not recommended
Operation Instructions
                                                                                     

Related Products

Shopping Cart
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
Mailing Lists
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop

MTI-UCSD Battery Fabrication Lab


MTI Sponsors the Postdoctoral Awards

Upcoming Shows:
MS&T 2018 Oct 14-18 Columbus OH Booth 513

2018 MRS Fall Meeting and Exhibit Nov 25 - 30 Boston MA Booth 901

APS March Meeting 2019 March 4-8 Boston MA

Recent Attended Shows:
Furnaces North America Oct 8-10 Indianapolis IN

AiMES 2018 Sept 30 - Oct 4 Cancun Mexico


Zhejiang University MSE Visiting August 10th Richmond CA


Click here to see our past conferences

 

Notices
1. Prices listed online are valid for US market and whom pay by credit card only. There will be extra charges for shipping & handling. Price various from country to country.
2. We may add extra charges for paper order and net30 terms due to extra labor cost.
3. The prices listed are subject to change without notice.