Browse Categories

60T Benchtop Electric Hydraulic Press with Precision Digital Pressure Controller - YLJ-60E

Please call for the delivery time
Item Number: YLJ-60E
Transported by LTL Freight (Truck)
Model YLJ-60E is a CE Certified electric hydraulic pressing machine up to 60 metric tons for preparing compound or ceramic sample faster and easier. YLJ-60A has built in hydraulic pump which is driven by electric oil pump with the digital pressure controller. Transparent protection shield around the machine is included with interlock It is an excellent tool for material/ceramic / chemistry laboratories to make larger pellet sample.

Update: MTI YLJ series Pressers were CE approved on Mar. 2015。 YLJ-60E  has been upgraded  from YLJ-60A with digital pressure controller since Sept.30, 2016

Max. Pressure 60 Metric Tons
Gauge Pressure Value to Force Conversion

Gauge Displayed Pressure Value (MPa)
10 15     20     25     30     53    
Actual Force Applied on the Hydraulic Cylinder (Ton) 11.3     17.0   22.6   28.3 33.9 60

  • Displayed Pressure Value to Actual Applied Force Conversion: 1 MPa = 1.13 Ton
  • The actual force applied on the Hydraulic Cylinder (Ton) equal to the force applied on your working piece
  • For calculating the actual pressure (MPa) applied on your working piece, please follow the equations in below:
          P = T x g x 10/ (πr^2)
    • P: Pressure (MPa) applied on your working piece
    • T: Force (Ton) applied on the Hydraulic Cylinder 
    • g: Standard gravity. g ≈ 9.8 m/s2
    • π: ~3.14
    • r: Radius (cm) of the working piece
Electric Hydraulic Pump
  • Standard: 110VAC - 240V AC ( single phase 。 50/60hz )  for worldwide use
  • 150 W  DC gear motor ( 24VDC)
  • Optional: 110V-220V transformer for using under 110V
Digital Pressure Controller
  • Precision digital pressure controller is built in the press
  • Can set the desired pressure value by touch button on the controller
  • Accuracy: +/- 0.1 T
  • Pressure Stability: <= 1MPa / 5 minute
Bottom Hydraulic Cylinder Travel Distance 0 - 50 mm
Top Support Screw Adjustable Height 180 mm
Working Space 
  • Cylinder diameter 150 mm
  • Bottom working plate:: 178 mm
  • Max. Working space:  200mm L ×15mm D x 250 mm H
Protection Shield
  • Thick plastic shields around the press with electric interlock
  • Note: Must close door before operation
Dimensions of Machine 
Working Space
475mm(L) × 250mm(W) × 645mm(H)
Net Weight  160 Kg
Shipping Dimensions 47"(L) x 40"(W) x 41"(H)
Weight of Shipment 300  lbs
Application Notes
  • Check the Oil Level regularly using the included oil dipstick. Add AW 46 Hydraulic Oil if the Oil Level when low.
  • The pressing die cannot be used for pressing powder with the particle size < 30 microns. Small particles may slip into the gap between pushing rod and steel sleeve and cause damages to the sleeve during the compression. Ball mill and sieve the powder and apply only the 32~75 microns power to the pressing die to avoid the damages. Please consider using the 3'' Dia. Sieve Set No.200&450 Mesh to separate the 32~75 microns particles from the powder clumps. Please clean the die via ethanol after the completion of each experiment.
  • Do not raise the bottom cylinder (piston) more than it's maximum traveling distance. (50mm)
  • Warning: Customers must always wear protection goggles during operation !!!
  • For reasons of transportation or Idle for a long time, please tighten the nuts of the oil filling hole, which will affect pressurization. 
  • Operate the presser inside the glove box is not recommended
  • CE Certified
  • The pressing machine is ready to pass UL or CSA Certification at extra cost

Press Dies (optional)
Pressing dies with various diameters are available upon request at extra cost. Please click the picture below for more details

Operation Instructions


  • The pressing machine was quality inspected in the USA, lifetime support is provided
  • One year limited standard warranty (Extended warranty is available up to 5 years at extra cost)

Related Products

Shopping Cart
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
Mailing Lists
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop

MTI-UCSD Battery Fabrication Lab

MTI Sponsors the Postdoctoral Awards

Upcoming Shows:
Ceramics Expo May 1 - 3 Cleveland OH Booth 646

AeroMat 2018 May 7 - 10 Orlando FL Booth 1612

233rd ECS Meeting May 13 - 17 Seattle WA Booth 200

Recent Attended Shows:
2018 US-China EVBT Apr 8-10 UCSD San Diego CA

2018 MRS Spring Meeting Exhibit Apr 2 - 6 Phoenix AZ

35th International Annual Battery Seminar & Exhibit Mar 26 - 29 Fort Lauderdale FL

TMS 2018 147th Annual Meeting Exhibition Mar 11 - 15 Phoenix AZ

Click here to see our past conferences


1. Prices listed online are valid for US market and whom pay by credit card only. There will be extra charges for shipping & handling. Price various from country to country.
2. We may add extra charges for paper order and net30 terms due to extra labor cost.
3. The prices listed are subject to change without notice.