Browse Categories
Search

0-200,000 Newtons Pressure Calibration Kit: NIST certificated Load cell + Digital Meter - BS-070-200KN-LD


In stock
Item Number: BS-070-200KN-LD
    BS-070 is designed to calibrate the crushing tester for UN38.3 and IEC62133. This kit includes a Compression Load Cell and a Digital Strain Gage Panel Meter. The compression load cell can be utilized between 0 to 200kN in compression force. Furthermore, the stainless steel construction ensures long term stability. The Miniature size and low profile allow the users to calibrate another load cell in a limited space or a small chamber.

    The Digital Strain Gage Panel Meter is capable of being indicator or controller of the load cell with 4- digit standard LED display. The scaling capability of the meter also allows displaying all engineering units. The wide DC current input ranges cover typical strain applications. The front panel includes several buttons to program, zero, and record the measurement. 


Load Cell SPECIFICATIONS:

Excitation: 10 Vdc
Output: 2 mV/V nominal
5-Point Calibration: 0%, 50% 100%, 50%, 0%
Linearity: ±0.25% FSO
Hysteresis: ±0.20% FSO
Repeatability: ±0.10% FSO
Zero Balance: ±2% FSO
Deflection: 0.025 to 0.075 mm
Operating Temp Range: -54 to 121°C (-65 to 250°F)
Compensated Temp Range: 16 to 71°C (60 to 160°F)
Thermal Effects: Span: ±0.018% of Rdg/°C; Zero: ±0.009% of FSO/°C
Safe Overload: 150% of Capacity
Ultimate Overload: 300% of Capacity
Bridge Resistance: 350 Ohms minimum
Construction: Stainless Steel
Electrical Connection: 1.5 m (5 ft.) Shielded Cable
Operations 



  •  Could be used to calibration Hydraulic Pellet Press
Gauge Displayed Pressure Value (Bar)
 100 bar
 200 250  300   
 400
Actual Force Applied on the Hydraulic Cylinder (Ton)  3 .8 ton      
 7.7      
 11.5  
 15.4   
Read by Omega load cell (KN) 43 KN 89 107  129  

Digital Strain Gage Panel Meter Specification:

Input Ranges 0-100 mV, ±50 mV, 0-10 V, ±5 V, 0-20 mA, 4-20 mA
Isolation Dielectric strength to 2500V transient per 3mm spacing based on EN 61010 for 260Vrms or DC working voltage
Input Protection Voltage Input = 120 Vrms max; Current Input = 100 mA max
Input Impedance 100 Meg ohms for 100 mV or ±50 mV input range; 1 Meg ohm for 10 V or ±5 V input range; 5 ohms for 20 mA current input range
Display 4-digit, LED 9-segment, 21 mm (0.83")
Analog-to-digital technique Dual slope
Internal resolution 15 bits
Read rate 3/sec
Polarity Automatic
Max error process  ±0.03% of reading, ±1 count
Span tempco 50 ppm/°C
Step response 1 sec
Warm-up to rated accuracy 30 min
Load Regulation 1.1%
Line Regulation 0.02% per Vac
Analog output (optional) 0-10 V, 4-20 mA or 0-20 mA; may be assigned to a display range or to setpoint #1, when used as a proportional control output
Operating temperature 0 to 50°C (32 to 122°F)
Storage temperature -40 to 85°C (-40 to 184°F)
Relative humidity 90% at 40°C (104°F) (non-condensing)
Panel cutout 1/8 DIN, 45 x 92 mm (1.78" x 3.62")
Weight 575 g (1.27 lb)
AC Power Unit Power: 115 Vac or 230 Vac ±10%; 50-60 Hz, 11.5 watts max.
Excitation: 24 V @ 25 mA or 12 V @ 50 mA or 10 V @ 120 mA or 5 V @ 60 mA
DC Power Unit Power: 10-32 Vdc; 7.5 watts max.
Excitation: 24 V @ 25 mA or 12 V, 10 V, 5 V @ 35 mA (For Low/Medium Brightness)
Certification CE Certification  
UL Certified
Operation Manual

Related Products

Shopping Cart
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
Mailing Lists
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop

MTI-UCSD Battery Fabrication Lab


MTI Sponsors the Postdoctoral Awards

Upcoming Shows:
AiMES 2018 Sept 30 - Oct 4 Cancun Mexico

Furnaces North America Oct 8-10 Indianapolis, IN Booth 242

MS&T 2018 Oct 14-18 Columbus OH Booth 513

Recent Attended Shows:
Zhejiang University MSE Visiting August 10th Richmond CA

ICM 2018 July 16-20 San Francisco CA


ICT 2018 July 1-5 Caen France


AABC 2018 June 4-7 San Diego CA

Click here to see our past conferences

 

Notices
1. Prices listed online are valid for US market and whom pay by credit card only. There will be extra charges for shipping & handling. Price various from country to country.
2. We may add extra charges for paper order and net30 terms due to extra labor cost.
3. The prices listed are subject to change without notice.