Browse Categories

400°C Compact PECVD System with 3" Quartz Chamber - GSL-1100X-PECVD

Please email for lead time
Item Number: GSL-1100X-PECVD
Transported by LTL Freight (Truck)


This is a miniature PECVD furnace with 3" diameter x 16" Length quartz chamber, internal heating coil, two-channel gas mixing & delivery system, and a vacuum pump. The complete system is placed on a mobile cart for easy operation. The sample heating zone of plasma furnace can be heated to 400°C via a programmable temperature controller for the research of various film depositions.

Plasma Generator

  • Plasma Generator Power:                   115V  or 230VAC, 50/60 Hz, < 100W
  • Output Frequency:                               13.56 MHz
  • Three RF power levels:                        7.2W. 10.5W and 18W selectable
  • Chamber size:                                      quartz tube,  3"OD x 2.7"ID x 19" Length
  • Stainless steel flange on two ends of quartz tube, which allow vacuum up to 10^-2 torr by mechanical pump
  • The sample will be placed inside quartz tube and back of plasma generator. See drawing below to review structure
Slidable Flange
  • The sliding flange is installed on the mobile table for easy loading and unloading the sample.
  • The sample can be placed inside the heating coil in order to get the efficient heating process and ideal uniformity. Please click the pic for details.
Heater Coil & Temperature Controller
  • One 50mm OD x 40mm ID x 70mm coil heater is located on the side sliding, which can heat sample up to 400°C
  • One quartz tube of 2" ID x 75mm L shall be covered the coil heater to reduce heating loss
  • One high purity alumina boat (50L x 20W x 20H mm ) is included, and Sample can be placed inside alumina boat
  • 30 segments programmable digital temperature controller is located on bottom of plasma generator with +/-1ºC accuracy
    Heater Power requirement: 
  • Power Requirement:            AC 220V, 500W Max
Coil heater Quartz protective tube Temp. Controller Alumina boat
Two Channels Gas Flow Controller
Two Floating Flowmeter with flow rate range from 10 to 100 mL/min
Three Mechanical Pressure Gauge (mixing tank): -0.1-0.15 Mpa, (0.01 Mpa/grit)
Vacuum needle valves made of SS304
Three Pipe fittings for 1/4" pipe (nylon or stainless steel)
Compact size:  340Lx300Dx 180H, mm    ( 13.4"x12"x7").
Net:  Weight: 14 lbs.
No power required
Vacuum and gas fittings
  • The standard vacuum accessories include: 
  • A pair of 3" flange with KF-25 pump connector, one 1/4" Swagelok tube connector and two needle valves
  • Two KF-25 vacuum bellows (1-meter Length) and three KF-25 quick clamps
  • Note:
    1. Many inert gases can be chosen for plasma, such as N2, Ar, Air and Mixed gas depended on what kind material will be treated. (not included in the package)
    2. No flammable gas shall be used for the plasma generator
    3. You shall adjust chamber pressure and gas flowing rate to ensure plasma glowing to reach sample area in back of tube
Vacuum Pump
One Double Step Rotary Vane Vacuum Pump (110V, 226 L/m) with Exhaust Filter & KF-D25 Inlet -  with KFD25 adapter and 600mm length stainless steel pipe and high-quality filter are included
Ultimate total pressure of 30 mTorr or less
Heavy duty Mobile cart
One 600L x 600W x 600H, mm two shelves heavy duty mobile cart is included.
CVD system is placed on top of the cart
Plasma Generator:  8.5" H x 10" W x 8" D
Temperature Controller:  4"H x 10"W x 8"D
Mobile table and flange: 600 x 600 x 1000mm
Shipping package:  16" x 16"  x 28"
70 lb (include vacuum pump)
One year limited (no warranty for the quartz tube)
CE Certified
The tube furnaces with quartz tube are designed for using under vacuum and low pressure < 0.12 MPa (absolute pressure)
Operation Instructions

Related Products

Shopping Cart
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
Mailing Lists
MTI sponsors MTI-UCSD Battery Fabrication Lab:
MTI-UCSD Battery Fabrication Lab Opening

MTI sponsors MRS and ECS Postdoctoral Award:

MTI Sponsors the Postdoctoral Awards

Upcoming Shows:
BPS 2018 62nd Annual Meeting Biophysical Society Feb 17-21 San Francisco CA Booth 909

2018 SME Annual Conference & Expo Feb 25 - 28 Minneapolis, MN Booth 701

APS March Meeting 2018 Mar 5-9 Los Angeles CA Booth 123

TMS 2018 147th Annual Meeting Exhibition Mar 11-15 Phoenix AZ Booth 500

Recent Attended Shows:
2017 MRS Fall Meeting and Exhibit Nov 26 - Dec 1 Boston, MA

Click here to see our past conferences


1. Prices listed online are valid for US market and whom pay by credit card only. There will be extra charges for shipping & handling. Price various from country to country.
2. We may add extra charges for paper order and net30 terms due to extra labor cost.
3. The prices listed are subject to change without notice.