Browse Categories
Search

Compact Vacuum Sealer for Preparing Pouch Cell with Optional Stack-Up or Split Configuration - MSK-115A


Transported by LTL Freight (Truck)

Product Options

Configuration and Voltage:
MSK-115A or MSK-115AB is a CE Certified compact vacuum sealer for sealing aluminum-laminated pouch cell in glove box after injection of electrolyte into the cell or after formation of the final seal (polymer Li-Ion cell).
Optional Top/side sealing function without vacuum is available, which can use one machine to seal whole pouch cell to save space in the glovebox.

SPECIFICATIONS:
Configuration Please choose from the options bar for splittable two units or integrated one unit.
MSK-115A  (Standard two split unit)
MSK-115AC  ( optional One unit integrated )
    
Max. Sealing Dimensions 200mm(L) x 150mm(W)
Edge Sealing Width 5mm
Sealing Blade Hard type (without rubber, only for Al case sealing, not suitable for sealing case with tab in between)
Product Dimensions
  • MSK-115A
  • Sealing Unit with Chamber Closed: 470mm(L) x 430mm(W) x 480mm(H)
  • Sealing Unit with Chamber opened: 470mm(L) x 430mm(W) x 559mm(H)
  • Control Unit: 420mm(L) x 320mm(W) x 220mm(H)
  • MSK-115AC
  • Chamber Closed: 480mm(L) x 450mm(W) x 740mm(H)
  • Chamber Opened: 480mm(L) x 450mm(W) x 820mm(H)
  •  
Power Supply 110V or 208-240V selectable, Single Phase 50/60Hz
Max. Power 600W
Vacuum Level

Sealing Pressure 

  • 0~7Kg/cm² adjustable: Vacuum chamber lid and sealing die to need to be driven gas, Recommended driven gas pressure 60 psi.
  • Please use high purity inert gasses (Ar or N2), when operating in the glovebox. Using Air Compressor driven when operating outside the glove box.
  • Air Compressor and fitting are not includedplease click here to order or order from your local hardware store. Gas/Air tube size is 6.
  • Attention: If a gas cylinder is used instead of air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator.
               pic1                pic2
Sealing Temperature 50 - 250°C adjustable with control accuracy of  +/-2°C
Heating Timer 0 - 99 seconds Adjustable
Glove Box Compatibility


  • KF40 Feedthrough with all necessary wire and tube are included to allow operating inside Glove box, which has a KF40 port (Click on the first and second pictures for details)
  • Please use Inert gas when operating in the glove box.
  • Such a Feedthrough ensures air-tightness of glove box (Click on the third, fourth, and fifth pictures to enlarge)
                          
  • Attention: High purity inert gasses and Vacuum Pump are necessary for operating the MSK-115A and MSK-115AL Vacuum Sealer, please order them from the related products below.
Compliance
  • CE Certified
  • NRTL certification is available upon request at extra cost
Warranty One Year limited warranty with lifetime support
Operation Manual & Video                                        
            How to seal                          How to make pouch cell          How to operate in a glovebox
Optional Top / Side sealing function 

  • Standard vacuum sealer can not seal top side with the tab extruded. However, upgrading 3:1  sealer can be done to achieve this function with  Rubber Sealing blade and Manual & Footswitch.  Please click picture below to order:
                                                                        
Net Weight 150 lbs
Shipping Weight & Dimension 215 lbs; 48"x40"x29"

Related Products

Shopping Cart
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
Mailing Lists
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop

MTI-UCSD Battery Fabrication Lab


MTI Sponsors the Postdoctoral Awards

Upcoming Shows:
MS&T 2018 Oct 14-18 Columbus OH Booth 513

2018 MRS Fall Meeting and Exhibit Nov 25 - 30 Boston MA Booth 901

APS March Meeting 2019 March 4-8 Boston MA

Recent Attended Shows:
Furnaces North America Oct 8-10 Indianapolis IN

AiMES 2018 Sept 30 - Oct 4 Cancun Mexico


Zhejiang University MSE Visiting August 10th Richmond CA


Click here to see our past conferences

 

Notices
1. Prices listed online are valid for US market and whom pay by credit card only. There will be extra charges for shipping & handling. Price various from country to country.
2. We may add extra charges for paper order and net30 terms due to extra labor cost.
3. The prices listed are subject to change without notice.