Browse Categories
Search

Dual Explosion-Proof Box for Battery Safety Test ( 20"x20"x20", 125L, UN38.3.4.7 & 8 ) - MSK-TE903-UL


Please email for lead time
Item Number: MSK-TE903-UL
Transported by LTL Freight (Truck)

The MSK-TE903-UL Dual Explosion-Proof Steel Box provides a safe enclosure for over-charging & forced discharging of all kinds of battery cell testings based on the UN38.3 standard (38.3.4.7 & 38.3.4.8). The two separate compartments with a total of 4 feedthrough ports allow for testings of multiple batteries at the same time.

Note: MSK-TE903 was updated to MSK-TE903-UL since Jan.13,2017

SPECIFICATIONS

Power

100 - 240VAC ( 50/60Hz), 100W


Structure & Material




          

  • Materials:    
    • Chamber:  1.5 mm thick brushed SS304  with tensile strength > 500 Mpa
    • Exterior:    3 mm thickness cold rolled steel with tensile strength > 400 Mpa
  • Structure:            Two anti-explosion chambers, top and bottom
  • Chamber Size:     500mm x 500mm x 500mm (x2)
  • Testing Cables:    Two 3 meters long cable with clamp are included, Max. current rating is 30A 
  • Ports:                  Each chamber has two 2" diameter holes reserved for electric cables of battery testing equipment
  • Safety door:         Pressure relief door is built on the back of each chamber. In the event of a battery explosion, the door will open and release pressure. 
                         
  • Note:  The max. capacity of Li-Ion batteries to be tested in the chamber should be limited to 4.2V@ 40Ah for single cell  or 160Wh for battery pack without protection circus

Venting Fan

  • Venting port with high quality exhaust fan is installed  in back chamber which shall be connected to your venting system. (ducting and exhaust system are not included )
  • Warning:  Must keep venting fan and exhaust system running during battery testing to avoid pressure build-up in the case of battery explosion.
  • Centrifugle in-line exhuast fan with aluminum flex duct connection is recommended. (Click pic below to read detail)
                  

Lighting

  • Anti-explosion LED light (30W) is installed inside of each chamber. 
  • Angle of illumination is adjustable upto 90°

Electrode Holder & Cables

Two sets of battery electrode clamps with 10 AWG gauge cables (30A Max.) are included for easy & quick connections to batteries

Mobility 

Four mobile wheels are installed at the bottom for easy transportation

Dimensions & Weight

  • L700mm*W630mm*H1800mm
  • 200Kg
Battery Testers (Optional)


A smart battery analyzer for use as the source of over-charging and forced discharging is available through here:

Warranty One year limited manufacturer's warranty with lifetime support; extended warranty available upon request at additional cost.
Demo Video
   
Application Notes

Related Products

Shopping Cart
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
Mailing Lists
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop

MTI-UCSD Battery Fabrication Lab


MTI Sponsors the Postdoctoral Awards

Upcoming Shows:
MS&T 2018 Oct 14-18 Columbus OH Booth 513

2018 MRS Fall Meeting and Exhibit Nov 25 - 30 Boston MA Booth 901

APS March Meeting 2019 March 4-8 Boston MA

Recent Attended Shows:
Furnaces North America Oct 8-10 Indianapolis IN

AiMES 2018 Sept 30 - Oct 4 Cancun Mexico


Zhejiang University MSE Visiting August 10th Richmond CA


Click here to see our past conferences

 

Notices
1. Prices listed online are valid for US market and whom pay by credit card only. There will be extra charges for shipping & handling. Price various from country to country.
2. We may add extra charges for paper order and net30 terms due to extra labor cost.
3. The prices listed are subject to change without notice.