Browse Categories
Search

Electric Coin Cell Crimping Machine for CR20XX button cells ( NRTL Ready & Ar Gas Compatible ) - MSK-160D


In stock
Item Number: MSK-160D
Transported by LTL Freight (Truck)

Personalization

* denotes required field

Select Working Voltage*
Optional Die Sets

MSK-160D is a CE Certified and MET ready electric crimper for the CR20XX series coin cells such as CR2016, CR2025, and CR2032. MSK-160D is designed to be operated at both inside and outside of a glove box. This crimper can be used under Argon gas for half-cell testing.     (Per customer requests, we updated MSK-160D1, a purchase for coin cell disassembling, with single set of die to lower cost as of 4/17/2015)

SPECIFICATIONS:

Power
  • 110 - 240V AC 50/60Hz for universal use (5A Fuse)
  • 24V DC motor with reducing gear, 15W 
Die Set & Compatibility



               
Pressure 





  • The pressure applied to seal the cell case is pre-set to a constant pressure at about 800 kg before shipping.
  • Pressure adjustment knob at the top can be used to adjust the pressure applied to the negative cap of the cell  to prevent case deformation.
  • You may use a load cell to calibrate pressure ( click Pic below to order at extra cost )
  • Or you can order our Pressure Adjustable with built-in load cell Electric Crimper - MSK-160E           
                                                                         
( Load cell kit w/o certification)          ( NIST certified Load cell kit)                       Crimpr with digital Pressure Gauge

Structure   Heavy Duty Steel Platform
Protection Shield Protection shield / enclosure (plexiglass) with safety interlock is installed
       
Product Dimensions
   220mm(L) x 130mm(W) x 430mm(H) 
Compliance
  • CE approval
  • MET certification (UL 1450) is available upon request at extra cost. Please contact our sales representatives for quote
              
Warranty One year limited warranty with lifetime support (rusted and damaged parts due to improper storage condition or maintenance are not covered by warranty)
Operation Manual & Video
               
Click here to read how to install the crimping die.  
Maintenance Notes & Warnings
  • Electrolytes are highly corrosive materials.The die set must be cleaned with alcohol after each use to avoid corrosion 
  • In the case a replacement die is needed, please click pic.1 in below to order.
  • The PTFE die (found at the top die) ejects the cell casing after crimping via spring loaded pressure. Do NOT over tighten the pressure adjustment knob to avoid damaging this PTFE die.
  • To set the proper pressure on the die, loosen the knob all the way until the spring compression is no longer stressed. Then start tightening the knob and stop turning it once the spring compression is felt.
  • This will prevent the PTFE die from becoming deformed by being subjected to excessive pressure. (Please refer to Pic.2 for details. )
  • Attention: Please use MTI Branded Coin Cell Cases with our crimper. We don't guarantee the crimping quality if other brand cells are used.
             
              Pic.1                           Pic.2.
 Optional

  • Please use vacuum pen to pick round electrode disk to make assembling at easy
         Coin Cell Cases & Realted Components  Coin Cell Cases & Related Components
 Net Weight 25 kg (55 lbs)
 Shipping Weight 45 kg (100 lbs)

Related Products

Shopping Cart
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
Mailing Lists
MTI sponsors MRS Postdoctoral Awards:
MRS Postdoctoral Awards Nomination
 

MRS Past Postdoctoral Award Recipients 


MTI sponsors ECS Battery Division Postdoctoral Associate Research Award 

ECS Battery Division Postdoctoral Awards Nomination


ECS Past Postdoctoral Award Recipients

Upcoming Shows:

231st ECS Meeting May 28 - June 2 New Orleans, LA Booth 312

Beyond Lithium Ion Symposium- 10 BLX June 27 - 29 IBM San Jose CA

ICT 2017 Jul 30 - Aug 3 Pasadena, CA Booth 204

MS&T 2017 Oct 8 - 12 Pittsburgh, PA

Recent Attended Shows:

Ceramics Expo Apr 25 - 27 Cleveland, OH

2017 MRS Spring Meeting & Exhibit Apr 17 - 21 Phoenix, AZ


Click here to see our past conferences

 

Notices
1. Prices listed online are valid for US market and whom pay by credit card only. There will be extra charges for shipping & handling. Price various from country to country.
2. We may add extra charges for paper order and net30 terms due to extra labor cost.
3. The prices listed are subject to change without notice.