Browse Categories
Search

1700ºC Vacuum* and Atmosphere Tube Furnace with 60mm Tube and Complete Accessory - GSL-1700X-UL


Please email for lead time
Item Number: GSL-1700X-UL
Transported by LTL Freight (Truck)

Personalization

Upgrade to Eurotherm Temp. Controller
GSL-1700X-UL is UL/CSA ready to pass bench-top 60mm tube furnace with 1800 Grade MoSi2 Heating Elements. It is widely used in material & chemical researching labs to sinter all types of new material samples under vacuum and other gas conditions. Vacuum sealing assembly is installed with 1/4" gas pipe adaptor. It is controlled by a 30segment programmable high precision SCR (Silicon Controlled Rectifier) digital controller with an accuracy of +/-1 oC. This tube furnace has a max. working temperature up to 1700ºC. Tube size can be selected in option bar.

SPECIFICATIONS
Tube Size
2 3/8"x 40"(60OD x 54IDx 1000mm L)
 Furnace Structure  
  • Double layer steel casing with air cooling.   
  • Two cooling fan inside to keep case temperature < 55ºC.  
  • High purity Alumina refractory chamber with 10mm thick 2500ºC grade YSZ ceramic liner.  

Power
Max. 5.2KW 
Voltage
Single Phase, 220V AC, 50/60 Hz (40A breaker required)
Max. Working Temperature
1700ºC < 1 hour 
Continuous Working Temperature
800-1600ºC
Max. Heating/ Cooling Rate
5ºC / min 
Heating Zone
457 mm (18")
Constant Temperature Zone
150 mm (6")
Heating Elements
Super 1800ºC grade MoSi2 heating elements (30 x 330mm), 8pcs
Temperature Controller
  • PID automatic control via SCR (Silicon Controlled Rectifier) power control with phase angle fired, current limitingresistor.
  • 30 programmable segments for precise control of heating rate, cooling rate and dwell time.
  • Please click here to learn why SCR is more accurate than SSC (Solid state relay).
  • Built-in over temperature alarm and protection allows for operation without attendant.
  • +/- 1 ºC temperature accuracy.
  • RS485 Communication Port.
  • Optional:  
    • The furnace may be operated by PC by installing a control module. Please order a MTS-02 control module at extra cost.  
    • If you order the PC control module together with the furnace, we will install and test it before shipping. We recommend you to order a computer (laptop) from us to avoid software installation problems. For more information please click here.
                        
       
Sealing Flanges
  • One pair of sealing flanges with double silicone high temperature O-rings is included.
  • Two SS needle valves and one dial vacuum gauge are installed on flanges for immediate use.
               
Fitting Ports

                               
Vacuum Level
 Limited by vacuum pump
  • 50 mtorr can be achieved by mechanical pump
  • 10^-5 torr can be reached by molecular pump
        
 Vacuum pump is not included, please order separately at related products section
Power Plug & Cable
  • 10 feet length 10-3 AWG heavy duty UL approven power cable is included. Extra length cable can be ordered by click picture below-left
  • The plug is not included. Browse our catalog for compatible plugs or obtain one from local hardware store.
                

Dimensions 590 L x 490 W x 760 H  mm
Net Weight 168 kg (370 lbs)
Shipping Dimensions 48" L x 40" W x 47" H
Shipping Weight 218 kg (480 lbs)
Warranty One year limited manufacture warranty with life time support (consumable parts such as furnace liner, processing tubes, and O-rings are not covered by the warranty, please order replacements at related products below).
Laptop, software & WiFi Control (Optional)
  • Brand new laptop with Microsoft Window 10 and Microsoft Office 2013 (30 days free trial) for immediate use.
  • Labview Based Temperature Control System (EQ-MTS01) enables user to edit temperature profile, manage heat-treatment recipe, record and plot data for MTI furnaces.
  • A wireless remote control provides up to 300 meters operating range.
  • Above features are available upon request at an extra cost (up to $1,000). Please contact us for more information.
  • Note: 
    The software is only compatible with MTI’s Yudian Temperature Controller

        

Compliance
  • CE Certified
  • All electric components ( >24V) are UL / MET / CSA certified
  • The furnace is ready to pass TUV(UL61010)  or CSA certification at extra cost. ( please click marks below to learn details )
                       
Application Notes
  • Two fiberous ceramic tube blocks are included for blocking heat radiation frominside tube (Ceramic blocks must be fully inserted into the furnace chamber before heating).

        

Operation Instructions                     

                    
                    

How to set up the furnace

Controller Operation Demo Video

How to create Temperature gradient

  
STANDARD PACKAGE
Description
Quantity
Flanges set and sealing O-ring
1 set
1000mm L 99.8% high purity Al2O3 ceramic processing tube (made in US) (O.D is selected by customer)
1
1
Alumina Foam Tube Blocks
4
furnace handle hook
1
 
OPTIONAL PARTS
 
Part No.
Description
Quick Link
EQ-KF-suite
KF-D25 series Vacuum Suite(vacuum pump, vacuum ball valve, vacuum bellows, quick clamps, KF adapter) Also you may buy individually.
EQ-MTS02
Temperature Control System for controlling MTI's furnace by using computer
EQ-CVM-211
Compact Digital Vacuum Gauge & Controller with Power Supply (Up to 10-4 Torr)
EQ-FM-Cart
Heavy Duty Mobile Car for All MTI Tube and Box Furnaces
  Gas mix station (Float flow meter / Mass flow meter) (2, 3, 4channels selectable)
Vacuum flange fittings 
 
High vacuum station (Mechanical pump + turbo molecular pump.)
 
Compact Flow Meter (float flow meter / mass flow meter)
Ceramic Boat/crucible

 

Related Products

Shopping Cart
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
Mailing Lists
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop

MTI-UCSD Battery Fabrication Lab


MTI Sponsors the Postdoctoral Awards

Upcoming Shows:
ICM 2018 July 16-20 San Francisco CA Booth 5

AiMES 2018 Sept 30 - Oct 4 Cancun Mexico

Furnaces North America Oct 8-10 Indianapolis, IN Booth 242

Recent Attended Shows:
ICT 2018 July 1-5 Caen France

AABC 2018 June 4-7 San Diego CA


233rd ECS Meeting May 13 - 17 Seattle WA


Click here to see our past conferences

 

Notices
1. Prices listed online are valid for US market and whom pay by credit card only. There will be extra charges for shipping & handling. Price various from country to country.
2. We may add extra charges for paper order and net30 terms due to extra labor cost.
3. The prices listed are subject to change without notice.