Browse Categories

Long Tape Casting Coater (10"Wx 32"L ) Vacuum Bed with Adjustable Doctor Blade & Optional Heater - MSK-AFA-L800-LD

Transported by LTL Freight (Truck)

Product Options

Optional Heating Lid:


Oillless Vacuum Pump OFP (+ USD$519.00)

MSK-AFA-L800 is a CE Certified and UL/CSA ready-to-pass 800 mm long tape casting coater with the vacuum chuck, and micrometer adjustable applicator. It is designed for producing the long thick film and has a unique driving system to produce smooth coating at all types of materials. It is specially designed for electrocoating of various cylindrical batteries such as the 18650 format.  New -- MSK-AFA-L800-H with heating lid is available in options bar now!

Working Voltage
A UL/CSA listed 100-240VAC IN - 24VDC OUT power adapter is included.
Power 150W
Traverse Speed 0 - 80mm/sec variable
Stroke Length 10 - 800mm adjustable by using Adjustable Position Switch
  • Aluminum alloy flat vacuum chuck
  • Vacuum chuck Dimensions: 800mm(L) x 250mm(W) x 25mm(H)

Vacuum Pump (Optional)

(Remove oilless pump from standard pack Since 02/26/2016 )
  • Please order CE Compliance 120L/min Oilless Vacuum Pump
  • The EQ-OFDP-2 is a UL Certified tiny silent powerful diaphragm pump, which is made in Germany and provides an excellent vacuum performance, now it's only $1455 for you to have this pump.
Film Applicator

  • Built in pushing bar for using micrometer adjustable applicator.
  • 180 mm width Applicator with micrometer adjustable head included making coating up to 800mm(L) x 180mm(W) (Click picture below to see details)
           Note:  Thinnest film can be achieved is > 10 microm   (Click here to order other size film applicators)

Max. Coating Area 800mm(L) x 250mm(W)
Accuracy of Film thickness +/- 0.01mm
Application Notes

  • Pic.1 and 2 show coated cathode and anode for Li-Ion battery. Please click here to see how to coat an electrode sheet.
  • It is recommended to operate the coater under a fume hood. (Click Pic.3 for detail.)
  • You need a vacuum mixer to remove air bubbles inside slurry and to make uniform coatings (Click Pic.4 for detail.)
  • You may need a Slurry Viscosity Tester to make coatings consistent (Click Pic.5 for detail.)
  • You may need a vacuum oven to dry the films and remove binder after coating. (Click Pic.6 for detail.)
  • Rolling pressing is necessary to ensure good density and adhesion of electrode materials to the current collector substrate after coating. Please select a rolling press from here. (Click Pic.7 for detail.)
  • For using other Film Applicator different from standard package, customized Traverse Pusher required to ensure the constant coating speed.( Click Pic.9 for detail.)
  • Test the flexibility of the coated electrode with EQ-MBT-12-LD mandrel bending tester. (Click Pic.10 for detail.)
                     Pic.1               Pic.2                 Pic.3               Pic.4               Pic.5               Pic.6                  Pic.7                   Pic.8                    Pic.9                  Pic.10

Heating Lid ( optional )
  • Heating lid is available at extra cost for drying. Please select mode MSK-AFA-L800-H from product options bar.
  • Working voltage of heating lid would be the same as the input voltage for the coater. Please select the voltage for MSK-AFA-L800-H from product options bar.
  • Max. working power: 1000W
  • Max. heating temperature: 100°C
  • Tip: For drying the coated Li-ion battery electrode sheets (usually 80C~100C is required), simply set the target temperature in the temp. controller, close the lid and wait for the slurry to be dried. 
Machine Dimensions
960mm(L) x (W) x 240mm(H) 
Net weight 40 kg (90 lbs)

  • CE certified
  • This machine is using 24VDC input power which shall be exempted from the safety inspection (according to UL61010/SPE-1000 regulation). However, with additional certification fee, MTI can arrange NRTL to perform UL/CSA inspection and label the machine per customer's request. Please contact us for the quote. 
Warranty One Year limited with lifetime support

Operation Video
Video for MSK-AFA-L800          Video for MSK-AFA-L800-H

Related Products

Shopping Cart
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
Mailing Lists
MTI sponsors MRS Postdoctoral Awards:
MRS Postdoctoral Awards Nomination

MRS Past Postdoctoral Award Recipients 

MTI sponsors ECS Battery Division Postdoctoral Associate Research Award 

ECS Battery Division Postdoctoral Awards Nomination 

Upcoming Shows:

253rd ACS National Meeting & Exposition Apr 2 - 6 San Francisco, CA Booth 1921

2017 MRS Spring Meeting & Exhibit Apr 17 - 21 Phoenix, AZ Booth 516

Ceramics Expo Apr 25 - 27 Cleveland, OH Booth 1242

231st ECS Meeting May 28 - June 2 New Orleans, LA Booth 312

Recent Attended Shows:

APS March Meeting 2017 March 13 - 16 New Orleans LA

TMS 2017 146th Annual Meeting & Exhibition Feb 26 - Mar 2, San Diego, CA

Click here to see our past conferences


1. Prices listed online are valid for US market and whom pay by credit card only. There will be extra charges for shipping & handling. Price various from country to country.
2. We may add extra charges for paper order and net30 terms due to extra labor cost.
3. The prices listed are subject to change without notice.