Browse Categories

18" Width Vacuum Sealer for Large Al-Laminated Pouch Cell ( Ar Gas Glove box Compatible) - MSK-18A

Transported by LTL Freight (Truck)

Product Options

MSK-18A is a larger vacuum sealer with 18" ( 457 mm) sealing width, which is designed for sealing large pouch cell for top, side and final vacuum sealed .  The vacuum sealer is Argon gas compitable and compact enough to put it into glovebox via a standar air lock chamber.


  • Smart design with airjet vacuum pump , which allow it can be used  either in air or any inert gas 
  • Simple design with fix temperature setup for quick operation
  • Compact design for using at inside glovebox or tabletop
  • Relaible design with two years warranty

Working Voltage
  • AC110V or 220V, 50/60Hz (please select the voltage in the optional menu)
  • 1000W, 8A max. 
Sealing Area
  • MAX. Battery Placing Area:18" W (457 mm ) x 0.5” H  (12mm) 
Sealing Blade

  • Dual Copper made sealing blade with rubber buffer (soft sealing)
  • Preset Max.sealing temperature : 180oC without Controller
  • Optional:   precision digital temperature controller is available at extra cost
Glove Box Compatibility

  • A KF40 Feedthrough for Glovebox is included in the package.
  • Please use high purity inert gasses (Ar or N2), when operating in the glovebox. Using Air Compressor driven when operating outside the glove box.
  • DO NOT set the pressure gauge above 0.1MPa
Vacuum Level
  • Max. Vacuum:          -91 kPa  ( - 27 Incn-Hg)
  • Vacuum Flow Rate:   6 cfm   ( 28 Liter / minute)
Sealing Blade Dimension 635 mm L  x  6.35  mm W
Heating Timer 0 - 99 seconds Adjustable
Sealing Temperature Preset- 200°C  ( not adjustable )
Air Pressure Requirement

  • >100 PSI air or inert gas source required
  • if using at ouside  glovebox,  a air compressor is required
  • if you at inside glovebox, please use inert gas tank either N2 or Ar
  • Attention: If a gas cylinder is used instead of air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator.
               pic1                pic2 
Product Dimensions 33"x 10"x7“  ( without support tray)
Weight 40 Lbs
Compliance NRTL certification is available upon reuqest at the extra cost
  • One-year limited warranty with lifetime support
  • Rusting and damage due to improper storage condition or maintenance are not covered by warranty.
Operation Manual & Video


Related Products

Shopping Cart
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
Mailing Lists
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop

MTI-UCSD Battery Fabrication Lab

MTI Sponsors the Postdoctoral Awards

Upcoming Shows:
ICM 2018 July 16-20 San Francisco CA Booth 5

AiMES 2018 Sept 30 - Oct 4 Cancun Mexico

Furnaces North America Oct 8-10 Indianapolis, IN Booth 242

Recent Attended Shows:
ICT 2018 July 1-5 Caen France

AABC 2018 June 4-7 San Diego CA

233rd ECS Meeting May 13 - 17 Seattle WA

Click here to see our past conferences


1. Prices listed online are valid for US market and whom pay by credit card only. There will be extra charges for shipping & handling. Price various from country to country.
2. We may add extra charges for paper order and net30 terms due to extra labor cost.
3. The prices listed are subject to change without notice.