Browse Categories

Compact Jet Mill with Speed 50 - 500 g/hr - MSK- BPM-50

Please email for lead time
Item Number: MSK-BPM-50
MSK-BPM-50 is a lab-scale jet mill for materials with various hardness and properties. It grinds materials such as ceramic, magnet, ferrite and metallic alloy into micron-scale powder (2-5 microns) with the output rate of 50 - 500g/hr.
The jet mill grinds with a high-speed jet of compressed air or inert gas to collide the particles with each other. It is capable of outputting particles with the right size while continue milling particles above the desired size. Therefore, the ground product comes in a narrow size distribution and a good uniformity. Particles are separated from the gas stream by cyclonic separation.

Working Power
  • 208 - 240V AC 50/60Hz
  • 5000 W 
Required Air Pressure

  • 0.6 - 1.0 Mpa
  • Gas consumption rate: 0.5 m3/ minute
  • Note: Air compressor is needed for operation, please click the picture on the left to order
  • Attention: If a gas cylinder is used instead of air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator.
      pic1                pic2
  • Input: 100 - 200 mesh
  • Output: 2 - 5 micron, 50-500g/hr
Mill Liner
  • High purity fully sintered alumina
Net Weight
  • 75 kg 
  • 480 L x 320 W x 350 H (mm)
Cerification MET certification is available at extra cost
Warranty One year limited warranty with lifetime technical support
Operation Instructions

Related Products

Shopping Cart
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
Mailing Lists
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop

MTI-UCSD Battery Fabrication Lab

MTI Sponsors the Postdoctoral Awards

Upcoming Shows:
ICM 2018 July 16-20 San Francisco CA Booth 5

AiMES 2018 Sept 30 - Oct 4 Cancun Mexico

Furnaces North America Oct 8-10 Indianapolis, IN Booth 242

Recent Attended Shows:
ICT 2018 July 1-5 Caen France

AABC 2018 June 4-7 San Diego CA

233rd ECS Meeting May 13 - 17 Seattle WA

Click here to see our past conferences


1. Prices listed online are valid for US market and whom pay by credit card only. There will be extra charges for shipping & handling. Price various from country to country.
2. We may add extra charges for paper order and net30 terms due to extra labor cost.
3. The prices listed are subject to change without notice.