High Pressure and High Vacuum Tube Furance with Optional Alloy Tube ( 900 or 1100°C max heat temp.)

Click to enlarge

Sale Price: Starting at USD$13,665.00

If you are international, please click this.

Product Options

Select the furance model:

Quantity:

OTF-1200X series high pressure and high vacuum split tube furnaces can be chosen from two kinds of alloy tube, e.g. Stainless steel 310S refractory alloy or Ni based super alloy, which offer a solution of heating treatment under high positive pressure or high vacuum pressure with/without inert gas support to process special compound material. The furnace can be heated up to max. 900°C or 1100°C with optional vessel. The operating positive pressure is from 105 to 800 psi according to different heating temperature.

Features

Heating temperature up to max. 900°C or 1100°C , Depended on tube allou
Stainless steel or nickel-base super alloy processing tube is included ( please choose from product optional )
Max pressure up to 800 PSI.depended on tube alloy
Double layer steel casing with air cooling to keep furnace surface temperature lower than 60°C. High purity fibrous alumina insulation for Max. energy saving.
PID automatic control with 30 steps programmable. Automatic over-temperature and thermal broken protection.
Two sets of sealing flanges includ high positive pressure flange and high vacuum flange
The pressure sensor is installed in the flange. The pressure will be displayed in the pressure controller in the front panel of furnace. The alarm system is built in the pressure controller which allow user to set up the high and low limit point of pressure. When the measuring pressure exceed limit point, the alarm strobe and whistle will be activated for warning.
The furnace is able to be controlled by a computer. And the software and USB cable are included.
CE approval

Product gallery (click the pic to enlarge)


Temperature controller Demo video here	CF-63 flange and copper gasket	High pressure & High vacuum CF type flange	PC control software

Notice:
1. The heating temperature must be limited by the certain pressure level due to vessel material strength. Please refer to the specifications.
2. The pressure is increasing while the temperutre is rising during operation. So you need to calculate the pressure changing towards your target temperature and set a safe value of pressure during process.

Specifications

	OTF-1200X-HVHP-60	OTF-1200X-HVHP-80	OTF-1200X-II-HVHP-80	OTF1200X-60UV
Process vessel	SS310S Stainless Steel alloy 60mm O.D x 51 mm I.D x 1000 mm L	SS310S Stainless Steel alloy 80mm O.D x 72 mm I.D x 1000 mm L	SS310S Stainless Steel alloy 80mm O.D x 72 mm I.D x 1000 mm L	Nickel based super-alloy OD 60 x ID 52 x Length 1000 (mm)
Working pressure vs. working temperatue	750 PSI max at ≤650°C 450 PSI max. at ≤700°C 150 PSI max. at ≤800°C 50 psi Max at ≤900°C Never heat up above 950°C	525 PSI max .at ≤650°C 315 PSI max. at ≤700°C 105 PSI max. at ≤800°C 30 psi Max at ≤900°C Never heat up above 950°C	525 PSI max .at ≤650°C 315 PSI max. at ≤700°C 105 PSI max. at ≤800°C 30 psi Max at ≤900°C Never heat up above 950°C	800 PSI max. at ≤800°C 300 PSI max. at ≤1000°C 130 PSI max. at 1100°C Never heat up above 1200°C
Max. Heating temperature without load	950°C	950°C	950°C	1200°C
Vacuum	1E-2 torr by mechanical pump 5E-6 torr by turbo molecular pump	1E-2 torr by mechanical pump 5E-6 torr by turbo molecular pump	1E-2 torr by mechanical pump 5E-6 torr by turbo molecular pump	1E-2 torr by mechanical pump 5E-6 torr by turbo molecular pump
Working gases	Inert gas & Hydrogen No Oxygen	Inert gas & Hydrogen No Oxygen	Inert gas & Hydrogen No Oxygen	Inert gas, hydrogen and oxygen
Heating temp.	900°C max.	800°C max.	800°C max.	1100°C max.for < 1hr 1000C for continuous
Heating rate	≤30°C/min	≤30°C/min	≤30°C/min	≤20°C/min
Heating element	Fe-Cr-Al Alloy doped by Mo	Fe-Cr-Al Alloy doped by Mo	Fe-Cr-Al Alloy doped by Mo	Fe-Cr-Al Alloy doped by Mo
Heating zone	Total length： 440mm Single zone Constant temp. zone: 150mm ±1°C	Total length： 440mm Single zone Constant temp. zone: 150mm ±1°C	Total length: 200mm for each zone (two zone)	Total length： 440mm Single zone Constant temp. zone: 150mm ±1°C
Temp. control	PID control method with over-temp protection Temperature stability: ±1°C	PID control method with over-temp protection Temperature stability: ±1°C	PID control method with over-temp protection Temperature stability: ±1°C	PID control method with over-temp protection Temperature stability: ±1°C
Positive pressure sensor	installed in high pressure flange	installed in high pressure flange	installed in high pressure flange	installed in high pressure flange
PC control	Yes	Yes	Yes	Yes
Pressure alarm sys	Upper limit and lower limit control method Alarm strob and warning whistle	Upper limit and lower limit control method Alarm strob and warning whistle	Upper limit and lower limit control method Alarm strob and warning whistle	Upper limit and lower limit control method Alarm strob and warning whistle
Voltage	AC 220V 50/60Hz	AC 220V 50/60Hz	AC 220V 50/60Hz	AC 220V 50/60Hz
Power	2.5KW (20A breaker required)	2.5KW (20A breaker required)	2.5KW (20A breaker required)	2.5KW (20A breaker required)

Standard pacakge content

P/N	Name	Qty	OTF-1200X-HVHP-60	OTF-1200X-HVHP-80	OTF-1200X-II-HVHP-80	OTF1200X-60UV
	Tube Furnace main machine	1	√	√	√	√
	Processing vessel	1	√ (SS310S alloy)	√ (SS310S alloy)	√ (SS310S alloy)	√ (nickel-base alloy)
	High pressure flange w/ positive pressure sonser	1	√	√	√	√
	Vacuum flange w/KF40 and KF25 connector	1	√	√	√	√
	General flange for positive or vacuum	1	√	√	√	√
KF-Valve-D40	KF-40 right-angle valve	1	√	√	√	√
KF-Clamp-D40	KF-40 quick clamp	2	√	√	√	√
KF-Clamp-D25	KF-25 quick clamp	1	√	√	√	√
KF-BF25	KF-25 Blank flange fittings	1	√	√	√	√
ORing-Cu82	Oxygen-free coppor gasket	3	√	√	√	√
MTS02	USB cable and software for temp management	1	√	√	√	√
FLG-kit-2	Furnace hook	1	√	√	√	√

Optional parts

P/N	Name	Link
EQ-YTP-550	Heavy Duty Rotary Vane Vacuum Pump (7.8 CFM -240 L/m)
EQ-PV-HVS2	Turbomolecular Vacuum Pump Station (up to 1E-7 mbar)

Related Products

1200°C Split Tube Furnace with Vacuum Flanges & Optional Quartz Tube 60/100mm -- OTF-1200X-60/100 Sale Price: Starting at USD$4,595.00	High Pressure Tube Furnace with 20mm ID. Super-alloy Tube up to 1100C @ 700PSI- OTF1200X-HP-55 Sale Price: USD$19,995.00	Compact Turbo-molecular Vacuum Pump System (up to 1E-7 mbar) with Gauge, Ball Valve & SS Bellows - Made in Germany - EQ-PV-HVS Sale Price: USD$9,995.00
Compact Ultra-High Temperature Tube Furnace (25mm ID. 2000 C Max) with Digital Controller -- 8-12 wk delivery - EQ-GSL-2000X-25 Sale Price: Call for Pricing and Delivery Time	600 x 600mm Heavy Duty Mobile Car for Tube and Box Furnaces - EQ-FM-Cart-66 Sale Price: USD$295.00

High Pressure and High Vacuum Tube Furance with Optional Alloy Tube ( 900 or 1100°C max heat temp.)

Product Options

Related Products

1200°C Split Tube Furnace with Vacuum Flanges & Optional Quartz Tube 60/100mm -- OTF-1200X-60/100

High Pressure Tube Furnace with 20mm ID. Super-alloy Tube up to 1100C @ 700PSI- OTF1200X-HP-55

Compact Turbo-molecular Vacuum Pump System (up to 1E-7 mbar) with Gauge, Ball Valve & SS Bellows - Made in Germany - EQ-PV-HVS

Compact Ultra-High Temperature Tube Furnace (25mm ID. 2000 C Max) with Digital Controller -- 8-12 wk delivery - EQ-GSL-2000X-25

600 x 600mm Heavy Duty Mobile Car for Tube and Box Furnaces - EQ-FM-Cart-66