Browse Categories
Search

Ni-Based Superalloy High Pressure Hydro-thermal Reactor 1100°C Max, Optional Volume 65ml &100ml


Product Options

Vessel Volume:
RC-Ni-V is a compact reactor made of Ni-Base Superalloy, which has excellent creep strength and anti-oxidation. It can reach 1100 °C with a pressure up to 4Mpa under oxygen or inert gases. It is ideal tool for preparing advanced material by hydro-thermal method, especially heat treat sample under high oxygen pressure.
 
SPECIFICATIONS
Structure  Made of Ni-Based Super-alloy  ( Waspaloy or equivalent  )
Reactor Capacity & Dimensions (Please select the volumn in the option bar)
  • 55mm OD x 20mm ID x 210 mm height, 65 mL capacity
  • 65mm OD x 25mm ID x 210 mm height, 100 mL capacity
working Temperature RT -  1100 °C Max.
Working Pressure
  • 36 MPa (5292 PSI)     Max  at 500°C
  • 20 MPa (2900 PSI)     Max. at 800 °C
  • 12 MPa (1740 PSI)     Max. at 900 °C
  • 6 MPa   (870  PSI)      Max. at 1000 °C
  • 4 MPa   (588  PSI)      Max. at 1100°C
Accessories SS306 needle valve with 1/4 pipe connector included


Optional Upgrades  ( click picture to review details )      

304SS 1/4" O.D tube fitting - for connecting reactor to gas tank via 1/4" SS pipe

You may click the picture  to order dighi-pressure gauge 


Click picture above to  order a pressure relieft valve for safety operation
 
Optional: You may insert reactor into  vertical furnace with Temperature controller to 1100°C. ( click picture to order whole system
Warning
  • For your safety,  the high pressure vessel and furnace must be placed inside a explosive-proof box during using under high-pressure box or under fume hood.  never face on top flange to avoid accident.
  • Attention: Due to the high-pressure gas output from the gas cylinder, it is necessary to install the gas pressure regulator with it to reduce the output pressure, avoid overpressurizing the furnace chamber and ensure a safe operation. Click here to learn the installation of a gas regulator.
  • Recommend using a torque spanner to tighten the screws with the flange. Proper torque should be used is 200 N⋅m. Do not over tightening the flange screws as this may cause damages to the flange or screws.

Related Products

Shopping Cart
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
Mailing Lists
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop

MTI-UCSD Battery Fabrication Lab


MTI Sponsors the Postdoctoral Awards

Upcoming Shows:
AiMES 2018 Sept 30 - Oct 4 Cancun Mexico

Furnaces North America Oct 8-10 Indianapolis, IN Booth 242

MS&T 2018 Oct 14-18 Columbus OH Booth 513

Recent Attended Shows:
ICM 2018 July 16-20 San Francisco CA

ICT 2018 July 1-5 Caen France


AABC 2018 June 4-7 San Diego CA

Click here to see our past conferences

 

Notices
1. Prices listed online are valid for US market and whom pay by credit card only. There will be extra charges for shipping & handling. Price various from country to country.
2. We may add extra charges for paper order and net30 terms due to extra labor cost.
3. The prices listed are subject to change without notice.