Browse Categories
Search

RussiaTech 1800 MoSi2 Heating Element (30x360mm) EQ-HEL1800T-30360


In stock
Item Number: EQ-HEL1800T-30360
Specification:
  • Materials: MoSi2
  • Working temperature:
    • 1750°C (3182°F) in air (short time)
    • 1650°C (3002°F) in N2
    • 1170°C ~ 1450°C (2138°F ~ 2642°F) in H2
  • Volume Density: 5 ~ 5.6g/cm3
  • Bend strength: 15 ~ 25kg/cm3
  • Vickers hardness: (HV) 570kg/mm2)
  • Porosity rate: 7.4%
  • Water absorption: 2%
  • Heat extensibility: 4%
Dimension:

D1: Ø12mm   
D2: Ø6mm  
A: 30mm  
L=L1+L2:=20
0+160=360mm  


Installation

When installing heating element into furnaces, a separator should be placed between the two shanks of the heating element before hanging the element inside the furnace chamber.  The proper separator width should be selected to fit the shanks smoothly and avoid damage to the element. 

Warning:

Exercise extreme caution to not apply any stress on the elements during installation. Heating elements are very brittle and could break if the separator is too wide or if too much pressure is applied on them.
No warranty will be issued for damage caused by improper installation.

Resistivity Properties of MoSi2 Heating Element
  1. The resistivity of MoSi2 heating elements rises with increase in temperature (shown in the graph below). When the temperature of the heating stage is below 300°C, less than 35% of the total output power should be applied to avoid stressing the elements with excessive current.
  2. Generally the resistance of heating elements will not be affected by aging under normal operating conditions, therefore old elements can be used together with new ones.




Inspect your delivery:
Please check package for damages before accepting delivery.
Should damages found, please keep all packaging materials, take pictures, and report immediately to carrier/MTI.

No Warranty:
Kindly note this item is a consumable part, and not covered by warranty. Make sure to inspect for defect(s) thoroughly before use. 

Related Products

Shopping Cart
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
Mailing Lists
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop

MTI-UCSD Battery Fabrication Lab


MTI Sponsors the Postdoctoral Awards

Upcoming Shows:
Ceramics Expo May 1 - 3 Cleveland OH Booth 646

AeroMat 2018 May 7 - 10 Orlando FL Booth 1612

233rd ECS Meeting May 13 - 17 Seattle WA Booth 200

Recent Attended Shows:
2018 US-China EVBT Apr 8-10 UCSD San Diego CA

2018 MRS Spring Meeting Exhibit Apr 2 - 6 Phoenix AZ


35th International Annual Battery Seminar & Exhibit Mar 26 - 29 Fort Lauderdale FL


TMS 2018 147th Annual Meeting Exhibition Mar 11 - 15 Phoenix AZ


Click here to see our past conferences

 

Notices
1. Prices listed online are valid for US market and whom pay by credit card only. There will be extra charges for shipping & handling. Price various from country to country.
2. We may add extra charges for paper order and net30 terms due to extra labor cost.
3. The prices listed are subject to change without notice.