Browse Categories

Vacuum Station: High Speed Oilless Dry Vacuum Pump in Mobile Cart - EQ-VBS-ACP15-LD

In stock
Item Number: EQ-VBS-ACP15


VBS-ACP15 is a vacuum pump station to achieve vacuum pressure up to 10^-3 torr. The High-Speed Oil-less Dry Vacuum Pump is installed inside a heavy duty mobile cart, which is ideal as a support table for most of MTI's vacuum tube furnace and can be used a continuously overnight without over-heating.
  • No particle contamination:  The frictionless pumping module is optimized to operate without internal lubricant and provides an outstanding oil-free vacuum with no hydrocarbon vapor backstreaming. Without any seals between rotor and stator, no particles are generated. 
  • High reliability:   The absence of wearing parts inside the pumping module allows for unsurpassed long-term stability and high reliability in even the most demanding applications. 
  • Constant performances: The frequency converter drove motor provides constant rotational speed, thus stable pumping speed and  consistent ultimate pressure are achieved all over the world. 
  • Low maintenance cost: ACP pumps require overhaul only 20,000 hours of operation for the ACP 15 resulting in low cost of ownership. 
  • Condensable vaporability:  High flow gas ballast ports and drainable silencers allow  the ACP to pump high amounts of condensable vapors  (up to 1,000 g/h of pure water vapor).
  • Complete accessories included for immediate use
Dry Vacuum Pump
Mobile Cart
  • Cart Dimension:  600 mm (L) x 600 mm  (W) x 600 mm ( H)
  • 4 wheels mobile with brake
  • Four side panel is included and removable
  • Max. loading weight:  1000 lb
 Voltage / Frequency 110V - 240VAC, 50/60Hz
 Pumping speed
 Maximum Pressure 2.2E-2 torr (3 Pa)
The ultimate vacuum level by the pump may vary from chamber to chamber in terms of size and sealing condition.
Power 450W at ultimate pressure and 550W at atmosphere
Max. helium leak rate   < 5E-7 mbar/s
Working Temperature  12 ~ 40 0C
Only Pump Weight (kg); Dimension (mm) 23Kg, 514 x 190 x 270mm  (20.2 x 7.5 x 10.6") 
Flange Flange in: KF25
Flange out: KF16
Accessories Included
  • One 1 meter long SS  below with KF25 adaptor
  • Two quick clamps for KF25
  • One year (Attention: Improper use will cause all claims for liability and warranties to be forfeited. Improper use is deemed to be all use for purposes deviating from those mentioned in below, especially: 
    • Pumping of corrosive or explosive media.
    • Pumping of condensing vapors.
    • Pumping of liquids.
    • Pumping of dust.
    • Operation with improper high levels of insulated heat input.
    • Operation in potentially explosive areas.)
Application Notes
  • To protect the environment & human health, please use Traps & Filters to minimize exhaust. 
  • To protect vacuum pump from damage by condensed vapors or small particles, please connect a cold trap or particle trap to the pump foreline (for more detail, please click on pic.1 or pic.2 to order).
  • Please click pic.3 or pic.4 to order a vacuum gauge if needed.
                       pic.1                       pic.2                        pic.3                         pic.4
Compliance  CE approval
Attentions & Notes
  • Before switching off, isolate the pump from the installation and let it run for 1 hour with gas ballast opened. This "Pump Stop" procedure is very important in order to remove the condensable vapors from the pump and, therefore, keep it healthy for the next run.
  • The ultimate vacuum level achievable by the pump may vary according to the chamber size and sealing condition.

Related Products

Shopping Cart
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
Mailing Lists
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop

MTI-UCSD Battery Fabrication Lab

MTI Sponsors the Postdoctoral Awards

Upcoming Shows:
MS&T 2018 Oct 14-18 Columbus OH Booth 513

2018 MRS Fall Meeting and Exhibit Nov 25 - 30 Boston MA Booth 901

APS March Meeting 2019 March 4-8 Boston MA

Recent Attended Shows:
Furnaces North America Oct 8-10 Indianapolis IN

AiMES 2018 Sept 30 - Oct 4 Cancun Mexico

Zhejiang University MSE Visiting August 10th Richmond CA

Click here to see our past conferences


1. Prices listed online are valid for US market and whom pay by credit card only. There will be extra charges for shipping & handling. Price various from country to country.
2. We may add extra charges for paper order and net30 terms due to extra labor cost.
3. The prices listed are subject to change without notice.