Browse Categories

100T Electric Hydraulic Press with Digital Pressure Controller - YLJ-100E

In stock
Item Number: YLJ-100E
Transported by LTL Freight (Truck)
YLJ-100E is a CE Certified electric hydraulic pressing machine up to 100 metric tons for preparing compound or ceramic sample faster and easier. YLJ-60A has built in electric hydraulic pump which is driven by electric oil pump with the digital pressure controller. Transparent protection shield around the machine is included with interlock It is an excellent tool for material/ceramic / chemistry laboratories to make larger pellet sample.

  • Max. 100 Metric Tons
  • 10 - 100 T adjustable by digital controller
  • Pressure accuracy: +/- 1%
Pressure Controller
Electric Hydraulic Pump
  • Standard: 110VAC - 240V AC ( single phase 。 50/60hz )  for worldwide use
  • 750 W  AC motor
  • Optional: 110V-220V transformer for using under 110V
Bottom Hydraulic Cylinder Travel Distance 0 - 30 mm
Top Support Screw Adjustable Height 320 mm
Working Space 
  • Top  & Bottom working plate::  300  mm x 240 mm
Protection Shield
  • Thick plastic shields around the press with electric interlock
  • Note: Must close door before operation
Net Weight
  •  500 Kg
Shipping Dimensions 47"(L) x 40"(W) x 41"(H)
Weight of Shipment 550 kg
Application Notes
  • Check the Oil Level regularly using the included oil dipstick. Add AW 46 Hydraulic Oil if the Oil Level when low.
  • The pressing die cannot be used for pressing powder with the particle size < 30 microns. Small particles may slip into the gap between pushing rod and steel sleeve and cause damages to the sleeve during the compression. Ball mill and sieve the powder and apply only the 32~75 microns power to the pressing die to avoid the damages. Please consider using the 3'' Dia. Sieve Set No.200&450 Mesh to separate the 32~75 microns particles from the powder clumps. Please clean the die via ethanol after the completion of each experiment.
  • Do not raise the bottom cylinder (piston) more than it's maximum traveling distance. (50mm)
  • Warning: Customers must always wear protection goggles during operation !!!
  • For reasons of transportation or Idle for a long time, please tighten the nuts of the oil filling hole, which will affect pressurization. 
  • Operate the presser inside the glove box is not recommended
  • CE Certified
  • The pressing machine is ready to pass UL or CSA Certification at extra cost

Press Dies (optional)
Pressing dies with various diameters are available upon request at extra cost. Please click the picture below for more details

Operation Instructions


  • The pressing machine was quality inspected in the USA, lifetime support is provided
  • One year limited standard warranty (Extended warranty is available up to 5 years at extra cost)

Related Products

Shopping Cart
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
Mailing Lists
MTI sponsors MTI-UCSD Battery Fabrication Lab:
MTI-UCSD Battery Fabrication Lab Opening

MTI sponsors MRS and ECS Postdoctoral Award:

MTI Sponsors the Postdoctoral Awards

Upcoming Shows:
BPS 2018 62nd Annual Meeting Biophysical Society Feb 17-21 San Francisco CA Booth 909

2018 SME Annual Conference & Expo Feb 25 - 28 Minneapolis, MN Booth 701

APS March Meeting 2018 Mar 5-9 Los Angeles CA Booth 123

TMS 2018 147th Annual Meeting Exhibition Mar 11-15 Phoenix AZ Booth 500

Recent Attended Shows:
2017 MRS Fall Meeting and Exhibit Nov 26 - Dec 1 Boston, MA

Click here to see our past conferences


1. Prices listed online are valid for US market and whom pay by credit card only. There will be extra charges for shipping & handling. Price various from country to country.
2. We may add extra charges for paper order and net30 terms due to extra labor cost.
3. The prices listed are subject to change without notice.