Browse Categories

100T Automatic Hydraulic Press with Programmable PC Control - YLJ-100PC

Please call for the delivery time
Item Number: YLJ-100PC
Transported by LTL Freight (Truck)
YLJ-100PC is a computer controlled  electric hydraulic pressing machine up to 100 metric tons for preparing compound sample or test ceramic strength.  It is programmable  for pressing rate, constant pressure and dwell time with multi-segments via software.

  • Max. 100 Metric Tons
  • 10 - 100 T programmable by control Panel ( PC)
  • Pressure accuracy: +/- 1%
Pressure Control

  • All parameters are set up and programmable by the included  laptop computer via software, which included:
    • Pressing rate:  0.1KN/S - 100KN/S
    • 5 segements of constant pressure and dwell time
    • Curve of  the pressure vs time
    • Curve of the pressure vs deformation
Electric Hydraulic Pump
  • Standard:  208VAC - 240V AC ( single phase,  50/60hz )  for worldwide use
  • 2000 W  AC motor
Bottom Hydraulic Cylinder Travel Distance 0 - 70 mm
The space between top and bottom plate 300 mm 
Working width  260 mm ( Between two cylinder
Protection Shield
  • Steel door with electric interlock
  • Note: Must close door before operation
Net Weight
  •  800 Kg
  • Hydraulic Press:     850 x 550 x 1450 mm
  • Pump Unit:            1100 x 750 x 1000 mm   
Application Notes
  • Check the Oil Level regularly using the included oil dipstick. Add AW 46 Hydraulic Oil if the Oil Level when low.
  • The pressing die cannot be used for pressing powder with the particle size < 30 microns. Small particles may slip into the gap between pushing rod and steel sleeve and cause damages to the sleeve during the compression. Ball mill and sieve the powder and apply only the 32~75 microns power to the pressing die to avoid the damages. Please consider using the 3'' Dia. Sieve Set No.200&450 Mesh to separate the 32~75 microns particles from the powder clumps. Please clean the die via ethanol after the completion of each experiment.
  • Do not raise the bottom cylinder (piston) more than it's maximum traveling distance. (50mm)
  • Warning: Customers must always wear protection goggles during operation !!!
  • For reasons of transportation or Idle for a long time, please tighten the nuts of the oil filling hole, which will affect pressurization. 
  • Operate the presser inside the glove box is not recommended
  • CE Certified
  • NRTL certification is available upon request.

Press Dies (optional)
Pressing dies with various diameters are available upon request at extra cost. Please click the picture below for more details

Operation Instructions


  • The pressing machine was quality inspected in the USA, lifetime support is provided
  • One year limited standard warranty (Extended warranty is available up to 5 years at extra cost)

Related Products

Shopping Cart
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
Mailing Lists
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop

MTI-UCSD Battery Fabrication Lab

MTI Sponsors the Postdoctoral Awards

Upcoming Shows:
MS&T 2018 Oct 14-18 Columbus OH Booth 513

2018 MRS Fall Meeting and Exhibit Nov 25 - 30 Boston MA Booth 901

APS March Meeting 2019 March 4-8 Boston MA

Recent Attended Shows:
Furnaces North America Oct 8-10 Indianapolis IN

AiMES 2018 Sept 30 - Oct 4 Cancun Mexico

Zhejiang University MSE Visiting August 10th Richmond CA

Click here to see our past conferences


1. Prices listed online are valid for US market and whom pay by credit card only. There will be extra charges for shipping & handling. Price various from country to country.
2. We may add extra charges for paper order and net30 terms due to extra labor cost.
3. The prices listed are subject to change without notice.