|
Colloidal Alumina (Al2O3) Slurry, 16 OZ/ bottle 1.0 Micron - EQ-MTI-1000CAO
|
Click to enlarge
|
In stock
Item Number: EQ-MTI-1000CAO
Personalization
Quantity Discounts - Order a quantity in the range below to receive the discount
| Quantity | Amount |
| 3 to 9 | USD$47.45 |
| 10 to 25 | USD$44.96 |
|
INTRODUCTION
MTI-1000-CAO 1.0 micron colloidal alumina (Al2O3) slurry in pH range of 3.5 to 4.0 is for polishing a wide variety of materials, such as II-VI materials(NiFe, GaAs, GaN, and InP), ferrites, carbides, and almost all oxide crystals. Also the resulting low scatter finishes have been obtained on pure metals, epoxy resins and plastics.
MTI-1000-CAO is an acidic colloidal alumina (Al2O3) dispersion, with advanced chemical-mechanical action, that provides superior surface finishes. The unique, proprietary alumina particles provide aggressive removal rates while maintaining superior surface finishes. The information above should be used as a starting point for the customer's application
|
HOW TO USE
It is recommended that MTI-1000-CAO be used in pure form. However, if desired, it may be diluted up to a 1:1 ratio of using only high-quality de-ionized water (>18 M ohm). Mild agitation is all that is needed to keep the diluted slurry suspended. Storage and re-use of diluted slurry is not recommended. Due to the product unique formulation, it is further recommended that the user should not attempt adjustment of the pH. Maintain storage in a temperature-controlled environment, between 40 and 1000 F.
|
FOR SAFETY
MTI-1000-CAO is a safe, aqueous based slurry. All handlers should avoid skin contact, use personal protective equipment, rubber gloves, protective clothing, and splash goggles or a full face-shield when dispersion to avoid eye injury safety glasses, etc.
|
SPECIFICATION
Materials: Al2O3
Particle size: 1.0 micron
pH: 3.5- 4.0
Volum: 16 Oz / bottle
Storage: 40-1000 F
|
|
|
| | |
|
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed. | |
| | |
|
|
MS&T 2012, Booth# 536, Oct.9-10, 2012, Pittsburgh, PA, USA
 Nanotech 2012, Booth# 712, June 19-20, 2012, Santa Clara, California
 ECS 221st, Booth#208, May 7-9, 2012, Seattle,WA, USA
 SVC TechCon2012, Booth# 739, May 1- 2, 2012, Santa Clara, California
|
|
|
|
|
|
|
Notices
1. The price listed on line is valid for US market and who pay by credit card only. There will be extra cost for shipping and handling. The price is different from country to country
2. We may add extra cost for paper order and net 30 term due to extra labor cost
3. The price is subject to change without notice
|
|
|