Computerized Two Channel Precision Battery Analyzer for All Rechargeable Batteries up to 18V 120W - EQ-UBA5HV

The EQ-UBA5HV is aCE certified precision battery analyzer up to 18V 60W.  It tests, conditions, and charges batteries and then generates a test report showing the condition of the battery.

If you are already a battery expert you'll be pleased to know that the EQ-UBA5HV has enough features for even the most demanding battery test applications. With its graphical programming interface, you can easily design a battery test to do exactly what you want. You can specify the charge method (constant current or constant voltage with peak, timed, or temperature termination) and the charge and discharge currents. You can even use conditional loops in the test. All voltage, current and temperature readings are stored in a standard results file.

EQ-UBA5HV Features

• Works with all battery chemistries, NiCd, NiMH, SLA, lead acid, gel cell, lithium ion, lithium polymer and primary batteries.
• Fully programmable: you can set all charge and discharge currents, voltage settings, and charge algorithms.
• Includes award winning software, easy to use and powerful software that allows you to graphically design your battery analysis routines and can simultaneously control over 100 sets of EQ-UBA4HV from one PC.
• Can run one test cycle to check capacity of thousands (mAH) to test battery cycle life.
• Comes with two channels that can each analyze a battery or can be combined with each other or other EQ-UBA5V for unlimited charge and discharge current.
• Stores all results in industry standard ASCII format that you can import into your favorite spreadsheet.
• Battery temperature sensor option: use ours, use yours or use your battery's built-in sensor.
• Perfect for R&D Labs,
• Made in Canada with FCC approval and CE Mark.
• One year warranty

Specs at a glance (full specs in brochure)

• Battery type: all chemistries, primary and secondary cells
• Battery voltage: single cell or pack  to 18V
• Battery capacity: 20mAh to 100Ah
• Charge current: Up to 3A per channel
• Load current: Up to3 A/60W per channel   ( total 120W)
• Number of independent channels: 2 
• If you use the channel combiner  to connect two channel in parallel, you can charge a battery at up to 6A as following:

• Compatible with PC which has Window XP  and series port  ( Computer not included)
• Size/weight:   130 (w) x 170 (L) x 65 (H) mm  ( 5.1"x6.7"x2.6")     550 g (1.2 Lb)

Pic3: The testing result demonstrate via computer monitor

Pic4: The NiMH test with Peak charge cycle software

Pic5:  Initial constant current set up

Pic7:Initial Cut-off voltage set up