1500°C Compact Tube Furnace (2" O.D., ) with Complete Vacuum System - GSL-1500X-50LVS

• Double layer steel casing with two air cooling fans.
• High purity fiber alumina board chamber for the best energy saving.

Tube & Flange

• High quality Mullite processing tube with Max. working temperature of 1680°C.
• 2" (50.8mm) O.D x 1.75" (44.5mm) I.D x 30" (762 mm) Length.
• Stainless vacuum flanges with valves and  Dial vacuum  gauge are  installed on left side for geas inlest.
• KF25 Coonector, 600 mmm length stainless steel pipe , and digital vacuum gauge. are installed on right side to connect the vacuum pump

                

• Double Step Rotary Vane Vacuum Pump (110V, 226 L/m) with Exhaust Filter & KF-D25 Inlet  with Vacuum Bellows and KF25 Clamp re included for immediate use
• Vacuum elevel can reach 50 m-torr by mechanaical vacuum pump included
• Vacuum elevel can reach 10-5 torr by optional moleculor pump    

   

Working Temperature:

• 1400 °C Continuous, 1500 °C short time (less than 60 mins).

Temperature Controller:

• PID automatic control via SCR (Silicon Controlled Rectifier) power control, e.g. current limiting phase angle fired the resistor with 30 steps programmable.

   
• Built in protection for over-heated and broken Thermal couple. 
• Temperature Accuracy: +/- 1 °C
• S type thermal couple                                                         

            

  • Optional: PC control interface & Software is available at extrat cost, click picture below to see detail specs and order separately

Max. Heating Rate:

     20°C / min

Constant Temperature Zone

     80 mm

Temperature Accuracy:

     +/- 1.0°C

Input:

    Single Phase, 220V AC, 50/60 Hz

Output:

    2.5 KW Max. (20A breaker required)

Dimension:

    400 x 300 x 530 mm (15.7" x 12" x 21")

Net Weight:

    68 kg (150 lbs)

• How to set up ceramic tube and vacuum flange for MTI Tube furnace.
• In order obtain accurate temperature inside tube furnace, you need to calibrate temperature before use, please click here to learn how.
• Please click here to review typical temperature calibration curve.
• Please click here to learn how to maintain tube furnace to get longer service life .