1600ºC Vacuum Tube Furnace ( 80mm OD) with Complete Accsories - GSL-1600X-80

• ID: 72mm; OD: 80 mm in diameter  x 1000 mm length, 99.8% purity alumina tube included.
• Two fiberous ceramic tube blocks are included for blocking heat radiation from inside tube. (Ceramic blocks must be fully inserted into the furnace chamber before heating);

           

 1700 grade fiber alumina casted in vacuum;  

• PID automatic control via SCR (Silicon Controlled Rectifier) power control, e.g. current limiting phase angle fired the resistor  with 30 steps programmable.
• Please click here to learn whySCR is more accurate than SSC (Solid state relay).

• 80 mm diameter stainless steel vacuum seal assembling with one vacuum gauge, two valves , and two porous ceramic blocks are included. Please click picture to see flange structure

                                                                                

                                                          

• In order to increase the throughput and achieve high vacuum, you may replace the standard barbed hose fitting with the KF25 adapter, please click underline to order.
• For supplying high pressure gas, you may replace the standard barbed hose fitting with the VCR Face Seal Fitting, please click underline to order.

  475 Lb

• One year limited warranty for electronic and mechanical part, excluding heating element and ceramic tube damaged by user  
• Click here to see typical temperature calibration result and general advise.
• click here to learnHow to use and maintain Alumina tube in MTI high temperature tube furnace.
• In order to obtain accurate temperature inside tube furnace, you need to calibrate temperature before use, please click here to learn how.
• How to set up ceramic tube and vacuum flange for MTI Tube furnace.