Compact 1600°C Tube Furnace with 40mm Alumina Tube & Vacuum Flanges / Valves - GSL-1600X-40

• Double shell case with forced air cooling by two fans.
• 1800C grade fibrous alumina insulation for max. energy saving.
• Kanthal GLOBAR^®1650 ^oC grade SiC rods ,  4 pcs. ( click picture below for detailed specs )

Tube and Flange 

• High purity Al₂O₃ ceramic with Max. working temperature .
• 42 mm O.D x 38mm I.D. x 700 mm Length.
• A pair of vacuum flanges with two valve and one pressure gauge is included. (click picture below to see detail)
• For fast & better vacuum, suggest you use stainless steel pipe ( click to order at extra cost ) , as wel as digital vacuum gauge.             

  

                                  
• Two fiberous ceramic tube blocks are included for blocking heat radiation from inside tube. (Ceramic blocks must be fully inserted into the furnace chamber before heating)

                                                                      

• In order to increase the throughput and achieve high vacuum, you may replace the standard barbed hose fitting with the KF25 adapter, please click underline to order.
• For supplying high pressure gas, you may replace the standard barbed hose fitting with the VCR Face Seal Fitting, please click underline to order.

Working Temperature:

• 1600 ^°C 

Temperature Controller:

• PID automatic control via SCR (Silicon Controlled Rectifier) power control, e.g. current limiting phase angle fired the resistor with 51 steps programmable.

                                                      

   
• Self-tuning and built in protection from over-heated and broken thermal couple. Please click here to learn why SCR is more accurate than SSR (Solid State Relay)
• Optional:   PC control interface & Software is available at extrat cost, click picture below to see detail specs and order separately

Max. Heating Rate:

 10 ^oC / min

Constant Temperature Zone

  80 mm

Temperature Accuracy:

  +/- 1.0 ^oC

Input:

  Single Phase, 208 - 240V AC, 50/60 Hz.

Output:

  4 KW Max, 30A breaker required.

Dimension:

 400 x 300 x 530 mm (15.7" x 12" x 21")

Net Weight:

 45 kg (100 lbs)

• One year limited warranty (Consumable parts such as processing tubes, o-rings and heating elements are not covered by the warranty, please order the replacement at related products below.)
• CE certified 

• How to set up ceramic tube and vacuum flange for MTI Tube furnace.
• In order to obtain accurate temperature inside tube furnace, you need to calibrate temperature before use, please click here to learn how.
• Please click here to review typical temperature calibration curve.
• Please click here to learn how to maintain tube furnace to get longer service life.

GSL-34-01

GSL-34-02

A Pair of Vacuum Sealing Flanges Assembly with Valve and Gauge and 4 pcs of High Temperature Vacuum Gasket included

GSL-34-03

GSL-34-04

GSL-34-05

GSL-34-06

GSL-34-11

MF-Cart

Optional: (at extra cost -- click picture to order) You may order a mobile cart to put the furnace on it and to make furnace easy to move