High Pressure Tube Furnace with 20mm ID. Super-alloy Tube up to 1100C @ 700PSI- OTF1200X-HP-55

OTF-1200X-HP-55 is a CE certified split tube furnace with Ni based super-alloy tube (55mm O.D x 20 mm I.D x 600 mm L) and flanges-/valves. It is designed for using at high pressure (5 MPa) up to 1100°C under oxidizing and inert gas atmosphere to process special compound. It is ideal furnace to preparing new materials under high pressure, and also can be used as mini HIP to treat metallic sample.

Furnace Structure	Double layer steel casing with air cooling. High purity fibrous alumina insulation for Max. energy saving. Aluminum heat sink on processing tube to ensure pressure flange and fitting < 80°C CE Certified
Power	2.5KW
Voltage	AC 208 - 240V Single Phase, 50/60 Hz
Max. Temperature	1100°C
Max. Heating Rate	<= 30°C/min
Material and Size of Pressure Vessel	Special Ni based Super-alloy 55 mm O.D x  20 mm  I.D. x 550 mm Length 1/4NPS fitting is installed in end of flange, and 1/4" high pressure stainless steel pipe shall be connected to the fitting. Please click picture below to see detail of pressure vessel                               Exterior                                                       Interior
Heating Zone length	250 mm  ( single zone )
Temperature Uniformity	+/-1°C within 50mm and +/-2°C in 70mm click the picture below to view the details of the Temperature Distribution Curve and Testing:            click to enlarge
Temperature controller	PID automatic control with 30 segments programmable LED digital display with protection Over temperature and thermal couple broken. Temperature accuracy: +/- 1°C
Pressure sensor and display	The pressure sensor is installed in the flange. The pressure will be displayed in the pressure controller in the front panel of furnace. The alarm system is built in the pressure controller which allow user to set up the high and low limit point of pressure. When the measuring pressure exceed limit point, the alarm strobe and whistle will be activated for warning. Super-alloy CF Flange with High Pressure Copper Seal Gasket. (click the underline to order)                                          High pressure flange assembly              Click the pic to order extra copper seal gaskets
Pressure Fitting	One Super-alloy flanges weld to tube with metal seal O-ring One Aluminum heat radiators are installed in front of flange to keep flange below 100oC One high pressure valves are installed with flanges One Pressure meter installed to one of valve
Working Pressure vs temperature	Maximum pressure inside the tube Heating temperature Max. 4300 PSI  (20 Mpa) 800°C Max. 2300 PSI  (15 Mpa) 900°C Max. 1600 PSI  (10 Mpa) 1000°C Max. 725 PSI   (5.0 Mpa) 1100°C Max. 400 PSI   (2.0 Mpa) 1200°C (short time <1 hr ) Warning:  Please set up pressure alarm point in digital pressure display before operation
Heating Element	Fe-Cr-Al Alloy doped by Mo
Dimension	550 x 380 x 520mm
Net Weight	about 45Kg
Shipping package Dimension	45x45x35 inch
Shipping weight	200lbs
Warranty	One year limited warranty (Consumable parts such as o-rings and heating elements are not covered by the warranty, please order the replacement at related products below.)
Certificate	CE certified