ࡱ > P R O + bjbj 7H e e # $ T 8 g g g g g B B B ! ! ! ! ! ! $ z# D E B B B B B E g g Z b b b B R g g b B b b : j [ g 7c? : p 0 # ~ # # , B B b B B B B B E E L B B B B B B B # B B B B B B B B B : Material Safety Data Sheet acc. to OSHA and ANSI
1 Identification of substance: Product details: Trade name: Copper (II) oxide Manufacturer/Supplier: MTI Corporation860 South 19th Street Richmond, CA 94804, USA 2 Composition/Data on components: Chemical characterization: Description: (CAS#) Copper (II) oxide (CAS# 1317-38-0): 100% Identification number(s): EINECS Number: 215-269-1 3 Hazards identification Hazard description: Xi Irritant Information pertaining to particular dangers for man and environment R 36/37 Irritating to eyes and respiratory system. Classification system HMIS ratings (scale 0-4) (Hazardous Materials Identification System) Health (acute effects) = 1 Flammability = 0 Reactivity = 0 4 First aid measures After inhalation Supply fresh air. If required, provide artificial respiration. Keep patient warm. Seek immediate medical advice. After skin contact Immediately wash with water and soap and rinse thoroughly. Seek immediate medical advice. After eye contact Rinse opened eye for several minutes under running water. Then consult a doctor. After swallowing Seek immediate medical advice. 5 Fire fighting measures Suitable extinguishing agents Product is not flammable. Use fire fighting measures that suit the surrounding fire. Special hazards caused by the material, its products of combustion or resulting gases: In case of fire, the following can be released: Metal oxide fume Protective equipment: Wear self-contained respirator. Wear fully protective impervious suit. 6 Accidental release measures Person-related safety precautions: Wear protective equipment. Keep unprotected persons away. Ensure adequate ventilation Measures for environmental protection: Do not allow material to be released to the environment without proper governmental permits. Measures for cleaning/collecting: Ensure adequate ventilation. Additional information: See Section 7 for information on safe handling See Section 8 for information on personal protection equipment. See Section 13 for disposal information. 7 Handling and storage Handling Information for safe handling: Keep container tightly sealed. Store in cool, dry place in tightly closed containers. Ensure good ventilation at the workplace. Information about protection against explosions and fires: The product is not flammable Storage Requirements to be met by storerooms and receptacles: No special requirements. Information about storage in one common storage facility: Store away from reducing agents. Further information about storage conditions: Keep container tightly sealed. Store in cool, dry conditions in well sealed containers. 8 Exposure controls and personal protection Additional information about design of technical systems: Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute. Components with limit values that require monitoring at the workplace: Copper fume, dusts and mists (as Cu) mg/m3 ACGIH TLV 1 (dust, mist); 0.2 (fume) Austria MAK 1 0.1 (fume) Belgium TWA 0.2 (fume); 1 (dust) Denmark TWA 0.1 Finland TWA 0.2 (fume); 1 (dust) France VME 0.2 (fume); 1 (dust) 1; 2-STEL (dust) Germany MAK 0.1 (fume); 1 (dust) Hungary TWA 0.2; 0.4-STEL (dust) Netherlands MAC-TGG 1 (dust) Norway TWA 0.05 0.1 (fume) Poland TWA 0.1; 0.3-STEL (fume) 1; 2-STEL (dust) Russia 1-STEL (dust) Sweden NGV 0.2 (resp. dust); 1 (total dust) Switzerland MAK-W 0.1; 0.2-KZG-W (fume) 1; 1-KZG-W United Kingdom TWA 0.2 (fume) 1; 2-STEL (dusts and mists as Cu) 1; 3-STEL USA PEL 0.1 (fume, dusts & mists) Additional information: No data Personal protective equipment General protective and hygienic measures The usual precautionary measures for handling chemicals should be followed. Keep away from foodstuffs, beverages and feed. Remove all soiled and contaminated clothing immediately. Wash hands before breaks and at the end of work. Avoid contact with the eyes. Avoid contact with the eyes and skin. Breathing equipment: Use suitable respirator when high concentrations are present. Protection of hands: Impervious gloves Check protective gloves prior to each use for their proper condition. Material of gloves The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Eye protection: Safety glasses Body protection: Protective work clothing. 9 Physical and chemical properties: General Information Form: Powder Color: Black Odor: Odorless Value/Range Unit Method Change in condition Melting point/Melting range: 1326 C Boiling point/Boiling range: Not determined Sublimation temperature / start: Not determined Flash point: Not applicable Ignition temperature: Not determined Decomposition temperature: Not determined Danger of explosion: Product does not present an explosion hazard. Explosion limits: Lower: Not determined Upper: Not determined Vapor pressure: Not determined Density: at 20 C 6.3-6.49 g/cm 10 Stability and reactivity Thermal decomposition / conditions to be avoided: Decomposition will not occur if used and stored according to specifications. Materials to be avoided: Reducing agents Dangerous reactions No dangerous reactions known Dangerous products of decomposition: Metal oxide fume 11 Toxicological information Acute toxicity: Primary irritant effect: on the skin: Irritant to skin and mucous membranes. on the eye: Irritating effect. Sensitization: No sensitizing effects known. Subacute to chronic toxicity: Copper compounds may be irritating to the skin, eyes and respiratory tract. They may cause metal fume fever, hemolysis of the red blood cells and injury to the liver, lungs, kidneys and pancreas. Ingestion may also cause vomiting, gastric pain, dizziness, anemia, cramps, convulsions, shock, coma and death. Additional toxicological information: To the best of our knowledge the acute and chronic toxicity of this substance is not fully known. No classification data on carcinogenic properties of this material is available from the EPA, IARC, NTP, OSHA or ACGIH. 12 Ecological information: General notes: Do not allow material to be released to the environment without proper governmental permits. 13 Disposal considerations Product: Recommendation Consult state, local or national regulations to ensure proper disposal. Uncleaned packagings: Recommendation: Disposal must be made according to official regulations. 14 Transport information Not a hazardous material for transportation. DOT regulations: Hazard class: None Land transport ADR/RID (cross-border) ADR/RID class: None Maritime transport IMDG: IMDG Class: None Air transport ICAO-TI and IATA-DGR: ICAO/IATA Class: None Transport/Additional information: Not dangerous according to the above specifications. 15 Regulations Product related hazard informations: Hazard symbols: Xi Irritant Risk phrases: 36/37 Irritating to eyes and respiratory system. Safety phrases: 26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. 36 Wear suitable protective clothing. National regulations All components of this product are listed in the U.S. Environmental Protection Agency Toxic Substances Control Act Chemical Substance Inventory. Information about limitation of use: For use only by technically qualified individuals. This product contains copper and is subject to the reporting requirements of section 313 of the Emergency Planning and Community Right to Know Act of 1986 and 40CFR372. 16 Other information: Employers should use this information only as a supplement to other information gathered by them, and should make independent judgement of suitability of this information to ensure proper use and protect the health and safety of employees. This information is furnished without warranty, and any use of the product not in conformance with this Material Safety Data Sheet, or in combination with any other product or process, is the responsibility of the user. ~ # % 4 5 A C J K M e f h k 3 5 C Q T j l 6 8 f D ù hO B*OJ QJ ph h+ h+ B*H*OJ QJ ph h+ B*OJ QJ ph hO o(hO B*o(ph hO OJ QJ hO 5OJ QJ h&R