Browse Categories
Search

1/2" I.D. Graphite Pellet Pressing Die w/ Pushing Rods - EQ-Die-12D-GP


Please email for lead time
Item Number: EQ-Die-12D -GP

Quantity Discounts

QuantityAmount
2 to 5USD$1,423.10
6 to 9USD$1,348.20
10 or moreUSD$1,273.30

EQ-Die-12D-GP graphite die is good for dry pellet pressing ceramic material at high temperature up to 1000 ºC.

SPECIFICATIONS:

Modle EQ-Die-12D-GP
Height 2 3/8" (60 mm)
Diameter 2" (50 mm)
Weight 1.3 Lbs

Whole set  pressing die includes
    • One 0.5"  I.D. core die  made of   high purity & high strength graphite --made in Japan
    • One sleeve for core dies protection
    • Two pushing rods highly polished to ensure a perfect fit in the die.
    • One pressing pole for releasing the sample from die only.
    • Max. Working temperature:
      • 399ºC in air
      • > 400 ºC  need inert gas protection
    • Max. sustainable pressure is 50Mpa (~0.6 ton applied on the die)


    Steps to make sample pellet

    • Mixing and grinding chemical powder by agate mortar
    • Calcine mixed the powder in a high temp furnace under suitable temperature
    • Grinding calcined powder again by mortar
    • Put calcined powder into the die
    • Pressing sample by a pressing machine under suitable pressure
    • Take out pellet sample from die
    • Sintering the pellet under suitable temperature
    • Then, a new material sample is formed!
    Instruction
                 
                       
    Cautions
    • Please must always wear protection goggles during operation !!!
    • The pressing die cannot be used for pressing powder with particle size < 30 microns. Small particles may slip into the gap between pushing rod and steel sleeve and cause damages to the sleeve during the compression. Ball mill and sieve the powder and apply only the 32~75 microns powder to the pressing die to avoid the damages. Please consider using the 3'' Dia. Sieve Set No.200&450 Mesh to separate the 32~75 microns particles from the powder clumps. Please clean the mould via ethanol after the completion of each experiment.   (pic. 1)
    • You may use BN coating as mould release (Pic 2)
                     Pic 1 Pic 2
    • Please use alcohol to clean the pressing die every time before use and store it in a dry place
    Application Note
    • You may consider using EQ-BNMR for easy mold release. Please click the picture below to order.

    Related Products

    Shopping Cart
    Your cart is empty.
    Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
    Mailing Lists
    MTI sponsors MTI-UCSD Battery Fabrication Lab:
    MTI-UCSD Battery Fabrication Lab Opening


    MTI sponsors MRS and ECS Postdoctoral Award:

    MTI Sponsors the Postdoctoral Awards

    Upcoming Shows:
    2017 MMM Conference Nov 6-10 Pittsburgh, PA Booth 9

    2017 MRS Fall Meeting and Exhibit Nov 26 - Dec 1 Boston MA Booth 901

    2018 SME Annual Conference & Expo Feb 25 - 28 Minneapolis, MN Booth 701

    Recent Attended Shows:
    MS&T 2017 Oct 8 - 12 Pittsburgh, PA

    232nd ECS Meeting Oct 1 - 5 National Harbor, MD

    The Battery Show North America 2017 Sep 12-14 Novi MI

    Click here to see our past conferences

     

    Notices
    1. Prices listed online are valid for US market and whom pay by credit card only. There will be extra charges for shipping & handling. Price various from country to country.
    2. We may add extra charges for paper order and net30 terms due to extra labor cost.
    3. The prices listed are subject to change without notice.