Precision Single-Axis Slide with Programmable Controller - 18" Travel

Complete kit for precision automatic single axis slide with 0.0005" ( 0.01 mm ) position accuracy , 8 " travel distance and programmable CNC controller, which includes

• 18" travel slide w/ stepper motor mount above
  •  Table size: 2.75" x 18" (70 mm x 457 mm)
  •  Hold-down provision: 2 T-slot
  • Table travel: 14" ( 355 mm)
  • Table height: 2" (51 mm)
  •  Mounting provision: 4 1/4-20 holes in bottom of base plus slot for angle clamps
• CNC linear controller, stepper motor, cable and power supply (see specs below)
  • Power supply: 120 VAC input; 24 VDC, 1 Amp output ( 220V power supply available upon request )
  • Stepper motor: 136 oz-in (uni-polar), 2 amp, NEMA 23 frame size, dual shaft (with flats pre-machined on shaft for Sherline coupling set screws)
  • Speed: Programmable from 1 in/min to 25 in/min   ( 25 mm/min - 625 mm / min )
  • Distance: from 0.0005. to 9.9995.( in steps of .0005.)
  • Mode settings:  INCHES, Programmable in inches to 3.5 decimal places
  • PROGRAM: 2 user-settable programs, 40 sequenced steps per program-set distance, direction, speed and .wait.
  • SETTINGS: Slow (starting ramp-up speed), Fast (Max. speed after ramp-up), Direction (in or out), Backlash compensation
• Handwheel: Graduated in increments of .001" for manual control

Bottom side mounting holes 2" on centers, 1/2" from back side.