Vacuum Mixer with 5L Water Cold Stainless Steel Tank and Vacuum Pump - EQ-SFM-6

• Advanced T type sealing to keep vacuum pressure up to 12 hours.
• Single Step Rotary Vane, 220 V 360 W (139 L/m) High speed vacuum pump is included for immediate operation.

• Container is opened or closed by compressor gas (compressing air pump is not included).
• 5 liter 304 stainless steel container with double layer water cooling jacket.
• Multi-layer blending blade has variable speed from 0-2800 RPM.
• A rotating blade close to container wall to keep container constantly cleaning during mixing.
• Programmable controller to set time, speed, rotation direction according your application.
• Mixer shaft is lifted by compressed air (>50 PSI, > 1.5Galon  air compressor is required, but not included )

Specifications

• Voltage:                       208-240VAC  single Phase, 50/60Hz, 30A Max (build-in frequency converter to ensure the mixer can be used under 50 or 60 Hz) 
• Rate power:                  750 W 
• Rotor rod speed:           0 -1400 RPM variable
• Clean Blade speed:      10 - 110 RPM adjustable
• Air pressure:                50 PSI required   (air compressor not included )
• Vacuum Level:             -0.1 MPa
• 304SS Container Size:  270mm O.D. x 210mm I.D. x 230mm H
• Instrument Dimension:   L x W x H   = 580x320x1340 mm
• Shipping Dimension:      L x W x H   = 700x600x1500 mm
• Net Weight:                  119 kg
• Shipping weight:           140 kg

Attention--- Utilities required

• The air compressor is necessary for operating the SFM-6 Vacuum Mixer, please order from the relate product below.
• You may order our recirculating water chiller for water cooling and save water-- see ralated product below

Mixer Blade (Default Type, 110mm diam.): High pumping action. Mixes an entire batch with minimal shear and heat buildup. Popular in the mixing and letdown of coatings.	An extra Mixer Blade (Folding Propeller, 80mm diam.) was included for immediate use	Mechanical Pressure Gauge and  two 1/4'' gas inlet/outlet for hose tube on the front	Cooling water 1/4'' Inlet and outlet on the back of the mixing tank (with build-in cooling jacket)