1200°C Hybrid Furnace (12x8x5", 7.2L), Dual 2” Tube / Muffle 3-In-1 - KSL-1200X-H-UL

• High purity alumina fiber insulation surrounding the chamber provides maximum energy efficiency. 
• Heavy-duty double-layer structure with a cooling fan to keep furnace exteriors safe to touch. 
• 18 heating elements installed on top and both sides.
• Vent port installed on top doubles as an outlet for gas flow.
  
• A 0.5" diameter observation window made of quartz glass allows the user to see inside the chamber.
• A protection latch is installed to prevent accidental explosive damage
• An interlock is installed to cut off power as soon as the door is open
• The fibrous heating module is replaceable at low cost ( click pic below right to order )
• Optional Al203 sample plate can also be ordered for this furnace.
              

• Muffle furnace in the front for oxidized material.
• Two 2" O.Dx12"L . atmosphere-controlled furnace tubes are included in the back for vacuum or inert gas ( < 3 PSI)
• Two tube blocks are included to replace the tubes for using the furnace solely as a muffle furnace.
• The furnace can be customized as 12 quartz tube (1") with flange for high throughput annealing 12 sample with a different composition at the same temperature.

Quartz tube w/ one end closed	Furnace Tubes at the Back	Muffle/Tube Properties	Interior	Furnace Tubes	Tube Blocks	Customized 8 -12 tube (0.75 -1")

• Two single side vacuum flanges with vacuum gauge and K25 vacuum port are included.  
• The flange has spare 1/4" ID port to insert a spare thermal couple or electric property testing fixture inside processing tube.  Please click picture below-left 2-3  to order them separately.
• Vacuum level can reach 10e-3 by a mechanical pump and 10e-5 torr by a turbo pump.  Click the picture below to order pump separately
• Optional： This furnace can be modified into multi-temperature display as pic below right 2
•                   Sing  tube with with vacuum flangeis is available Pic. below righ 1

 

• 12" D x 8" W x 5H" (300 x 200 x 120 mm)
• 480 cubic-inch or 7.2 Liter
• Click picture to see details   

• FA-YD518P-AG temperature controller is included.
• Proportional–integral–derivative control (PID control) and auto-tune function
• 30 segments programmed with ramping, cooling and dwelling steps
• Built-in over-temperature alarm and thermocouple failure alarm
• +/- 1 ºC temperature control accuracy
• Default DB9 PC communication port
• MET Certified

• MTS02-Y Temperature control software kit (for YD518P series controllers) + 15" laptop package is available at the options bar. Click for the detail information about the MTS02-Y software kit. 
  
• You may upgrade the temperature controller to the Eurotherm Temperature Controller which is fully compatible with LabVIEW. This package includes a Eurotherm programmer, a communication cable (RS485 - USB) and a software CD. Click the pic below to view the full spec of the Eurotherm temperature controller.           

• 25" x 21" x 27" / 635mm x 535mm x 670mm (D x H x W)
• Flanges in the back add 100mm in depth
• Leave extra space to slide out tubes and thermocouples in the back.

• One-year limited warranty with lifetime support.  
• ATTENTION: Any damages caused by the use of corrosive and acidic gasses are not under the coverage of MTI One Year Limited Warranty.

• CE Certified
• NRTL (UL61010)  or CSA certification is available at extra cost. (pls click mark below to learn details)
•                

• For preserving the longevity of the furnace components, we recommend the heating rate not to exceed 10 °C /min.
• The cooling rate shall also not exceed 10 °C /min.
  
• This furnace lacks vacuum sealing, toxic or explosive gasses are not recommended for use with this furnace without necessary safety controls and supervision.
  
• Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating.
• Click the pic left to choose a crucible