|
|
1200C Muffle Furnace (12x12x12", 27 L) w/ Programmable Controller- KSL1200X-M
|
|
In stock
Item Number: KSL1200XM
Transported by LTL Freight (Truck)
|
KSL-1200X-M-UL is a muffle furnace that offers a 12" x 12" x 12" high purity fibrous alumina chamber, gas inlet and outlet ports, and a 30 programmable segments temperature controller and UL / MET / CSA Certified electric components. It is the ideal muffle furnace for preparing samples with temperatures up to 1100 °C in research and dental labs with maximum energy saving.
SPECIFICATIONS
Structure
|
- High-purity fibrous alumina insulation for maximum energy saving.
- Heating elements on all three sides of the interior chamber for fast heating and enhanced temperature uniformity.
- Double-layer steel structure with air cooling fan to keep furnace's exteriors safe to touch.
- The safety interlock will automatically power off the furnace when the door is opened.
- Built-in vent port (top) to remove undesirable contaminants and moisture and extend the lifespan of the heating elements and furnace.
|
Chamber Dimensions
|
- Size: 12" x 12" x 12" ( 304 x 304 x 304 mm)
- Capacity: 27 liters (1728 cubic inches)
- Observation window of quartz ( 1/2" - 1" diameter ) is available upon request
 
|
Power
|
- 208~240V AC, Single phase, 50/60 Hz
- 5.5 kW, 30 A.
- Note: A power cord is included without a power plug.
A proper power plug is available via the figure on the left.
|
| Max Operating Temperature |
1200 °C continuously
|
Temperature Stability
|
±1 °C |
Temperature Uniformity
|
- +/- 5 °C over 200×200×200 mm @ 800°C
- +/- 2 °C over 80×80×80 mm @ 1100 °C
|
| Max. Heating Rate |
10 °C/min |
Temperature Controller
 |
- FA-YD518P-AG temperature controller is included.
- Proportional–integral–derivative control (PID control) and auto-tune function
- 30 segments programmed with ramping, cooling and dwelling steps
- Built-in over-temperature alarm and thermocouple failure alarm
- +/- 1 ºC temperature control accuracy
- Default DB9 PC communication port
|
Temperature controller (optional)
 |
- MTS02-Y Temperature control software kit (for YD518P series controllers) + 15" laptop package is available at the options bar. Click for detailed information about the MTS02-Y software kit.
- You may upgrade the temperature controller to the Eurotherm Temperature Controller which is fully compatible with LabVIEW. This package includes a Eurotherm programmer, a communication cable (RS485 - USB) and a software CD. Click the pic below to view the full spec of the Eurotherm temperature controller.
|
Laptop, software & WiFi Control (Optional)
  |
- Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial) for immediate use.
- Labview Based Temperature Control System (EQ-MTS01) enables the user to edit temperature profile, manage heat-treatment recipes, and record and plot data for MTI furnaces.
- A wireless remote control provides up to 300 meters of operating range.
- The above features are available upon request at an extra cost. Please contact us for more information.
|
Gas Fitting & Exhaust
|
- One 1/4" barbed Gas Inlet was installed on the back panel of the furnace.
- One gas exhaust port is built on the top of the furnace casing.
|
Product Dimensions
|
 24" x 34" x 24" (D x H x W)   Click here to order a heavy-duty mobile cart to carry dual furnace
|
| Shipping Dimensions |
48" x 40" x 50" (D x W x H) |
Shipping Weight
|
320 lb
|
Warranty
|
- One-year limited warranty with lifetime support.
- ATTENTION: Any damages caused by the use of corrosive and acidic gasses are not under the coverage of MTI One Year Limited Warranty.
|
Compliance
|
- CE Certified
- NRTL (UL61010) or CSA certification is available upon request at extra cost.
|
Application Notes |
- For longer furnace service life, we recommend the heating rate not to exceed 10 °C /min.
- The cooling rate shall also not exceed 10 °C /min.
- This furnace lacks vacuum sealing, and it is not recommended to use toxic or explosive gasses in this furnace without necessary safety controls and supervision.
- Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating.
- You may order an alumina crucible by click the picture below.
 click here to choose a crucible |
Operation Instructions |
  |
|
|
| | |
|
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed. | |
| | |
|
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop
MTI-UCSD Battery Fabrication Lab
MTI Sponsors the Postdoctoral Awards
Upcoming Shows:
|
|