1500C 8-Zone Split Tube Furnace For Thermal Gradient Processing - OTF-1500X-Z8

Material:  Mullite Ceramic   Made in the USA
Size:   84 O.D x 73 I.D x 1219mm L 

• Eight heating zones:  50 mm / each  (Included 20 mm spacing)
• Total heating zone length:  400 mm  
• Constant Temperature Zone length:   300mm  (If set 8 zone at same temperature) +/- 2ºC.
• Max. Tem[erature gradient:  100 °C/ cm  
• Note:  Thermal gradient can be adjusted by inserting thermal insulation spacing element between each heat.  Please contact our technical support to learn how
  

• 10E-2 torr by quality mechanical vacuum pump
• 10-5 torr by molecular pump

• Two thermal blacks are included. Please picture below to learn how to place them inside the tube
• You may order flange support to avoid tube rotating ( click Pic below right )

   

• 16 pcs  1500ºC grade Silicon carbide rod  (14mm Dia. x 150mm heating  x  413mm length)
• The heating element is consumable, Please click the picture below to order spare and replacement.
• 8 pcs S type thermal couple built-in

• The tube furnaces with mullite tubes are designed for use under vacuum and low pressure < 0.02 Mpa
• Never use graphite crucible in alumina tube.
• Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation. Please click here to learn the installation of a gas regulator. 
• The flow rate for gases should be limited to < 200 SCCM ( or 200ml/min )
•  Vacuum pressures may only be safely used up to 1300°C

• One-year limited warranty with lifetime support (consumable parts such as processing tubes, and O-rings are not covered by the warranty, please order replacements at related products below.).  
• ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of MTI One Year Limited Warranty.

• Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial) 
• Labview Based Temperature Control System (EQ-MTS01) enables users to edit temperature profiles, manage heat-treatment recipes, record and plot data for MTI furnaces.
• A wireless remote control provides up to 300 meters of operating range.

• CE Certified
• NRTL or CSA certification is available at extra cost. （ pls click mark below to learn details