|
|
Home Page
15 KW (30-80KHz) Desktop Induction Heater, (220V, 3 Phases) w/ Timer Control - SP-25AB
|
|
In stock
Item Number: SP-25AB
|
SP-25AB is a kind of high-frequency heating equipment, which features the latest inverting technology so as to make itself light and convenient. Its 15kW Induction Heater is designed for the material research lab to quickly melt and perform heat treating to metallic materials up to 2kg.
The product is updated from EQ-SP-25AB on 9/23/2014
SPECIFICATIONS:
| Working Voltage |
208-240V AC, 50/60 Hz, Three Phases (380V or 440V, Three Phases are available upon request)
|
| Max. Input Current |
- 42 A (Min. 50A breaker required)
- Power cable included (Plug is not included)
|
| Output Frequency |
30-80 kHz |
| Heating Current |
200-800 A |
| Max. Input Power |
15 KW |
| Duty Cycle |
80% |
| Max. Sample Weight |
2 kg |
Timer Control |
- Automatic timer control or Manual control selectable
- Manual Control: by Foot Pedal
- Automatic Heating Time: 1-99 Seconds
- Automatic Dwell Time: 1-99 Seconds
- Automatic Cooling Time: 1-99 Seconds
|
| Temperature Control Optional |
- One temperature control port built-in back
- In order to control temperature control by thermocouple for this induction unit, please order the temperature controller EQ-MTC-808
- You may also to consider order the complete system EQ-SP-25TC from us
  
|
Water Cooling
|
- Flowrate: >10 L/Min
- Pressure: ≥0.2 MPa (29 Psi)
- Tap water is acceptable, but using a Recirculating Water Chiller is highly recommended. Please click here to order separately
- Protection: Overpressure and over-temperature switch
|
Induction Coil
 |
2 pcs Induction Coil total,
|
| Display |
The digital display shows output power and current |
| Product Dimensions |
18"(L) x 8"(W) x 17"(H) |
| Warranty |
One Year limited warranty with lifetime support (Consumable parts like coils, fittings and clamps are not covered by the warranty) |
Compliance
|
- NRTL or CSA certification is available upon request at extra cost, please contact our sales representatives for a quote
|
| Operation Manual |
 |
Application Notes
  |
|
Melting
|
Sintering
|
Annealing
|
Heat treatment
|
Quenching
|
- The heater will shut down if over output occurs. Pls reduce coil cycle number to keep the heater operating under Max power
- Melting time and temperature are related to materials, the crucible, refractory insulation, etc.
- You may melt metal samples in a vacuum using a 60mm dia half-open quartz tube with a vacuum flange/valve. Please click the picture below for details on how to set up the vacuum tube
- For induction heating in the air or under the glove box, please contact MTI for the design below.
    
|
Warning |
- To prevent internal circuitry damage:
- Never allow the inductive current to exceed 800 A when the unit is in use.
- The maximum time duration for running the unit at the 600~800 A working current range should not exceed 60 seconds.
|
| Net Weight |
28 kg (62 lbs) |
| Shipping Dimensions |
40"(L) x 32"(W) x 35"(H) |
| Shipping Weight (Pounds) |
165 lbs |
STANDARD PACKAGE:
|
|
|
Sale Price: Replacement only for MTI Induction heater
|
|
Sale Price: Starting at USD$4,996.00
|
|
|
Sale Price: Not for sales, replacement only
| | |
|
| | |
|
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed. | |
| | |
|
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop
MTI-UCSD Battery Fabrication Lab
MTI Sponsors the Postdoctoral Awards
Upcoming Shows:
|
|