Browse Categories

1700°C Single Zone Alumina Tube Furnace with 3 Channel Gas Mixer, Vacuum Station, and Anti-Corrosive Vacuum Gauge - GSL-1700X-F3LV

Sale Price: Call or email for pricing
If you are international, please click this.
In stock
Item Number: GSL-1700X-F3LV
Transported by LTL Freight (Truck)


Upgrade to Eurotherm Temp. Controller
Select the tube size

GSL-1700X-F3LV tube furnace is a CE certified  alumina tube furnace with mechanical vacuum pump and three channels gas flowing system, which can heat the samples to 1700°C and achieve vacuum degree up to 5x10-2 torr and mix 1- 3  type of gases for CVD or diffusion. This furnace system also includes an anti-corrosive Pirani Capacitance Diaphragm Gauge to enable vacuum measurements with aggressive gasses.


Tube Furnace
  • Double layer steel casing with air cooling. Two cooling fans inside to keep the temperature of the outside case < 55°C.
  • High purity fibrous alumina insulation for Maximum energy saving.
Power Consumption 5kW Max.
Input Voltage AC 208~240V, Single Phase, 50/60Hz
Max. Heating Temp.
Max. Heating Rate
Max. Cooling Rate
Heating Zone Length
455mm (18")
Constant Temp. Zone
Temperature Accuracy
Temperature Controller
  • PID automatic control via SCR (Silicon Controlled Rectifier) power control with phase angle fired, current limiting resistor.
  • 30 programmable segments for precise control of heating rate, cooling rate and dwell time.
  • Please click here to learn why SCR is more accurate than SSC (Solid state relay).
  • Built in PID Auto-Tune function with overheating & broken thermocouple protection.
  • Over temperature protection and alarm allows for operation without attendant(s).
  • +/- 1 ºC temperature accuracy.
  • RS485 Communications Port.
  • Advanced Temperature Control (Optional)
    • MTS02-Y Temperature control software kit (for YD518P series controllers) + 15" laptop package is available at the options bar. Click for the detail information about the MTS02-Y software kit. 
    • You may upgrade the temperature controller to the Eurotherm 3504 Temperature Controller which is fully compatible with LabVIEW. This package includes a Eurotherm 3504 programmer, a communication cable (RS485 - USB) and a software CD. Click the pic below to view the full spec of Eurotherm 3504 temperature controller. 
Heating Elements 1800 grade MoSi2   ( 8 pcs )
Tube Materials and Size
  • 99.8% high purity Al2O3 ceramic tube
  • ID: 73mm x  OD: 80 mm   x 1000 mm length.    
Digital Vacuum Gauge 
Vacuum Sealing
  • Two stainless steel flanges with a digital vacuum gauge and valves are included.
  • Vacuum pressure can reach 5x10-2 torr via the mechanical pump.
  • The leaking rate is 6 mtorr/min in max. and 2 mtorr/min when stable, click the picture. below to get details chart and data measured by CE certificated digital vacuum meter:  
(For a whole 24 hours curve display, the time segment through 08:00:00~21:10:00 in X-axis is passed over in the chart, therefore, steep variety in there)

Vacuum Pump and fittings
Vacuum Pump

Option: For precise control of the vacuum pressure, we recommend you choose our turn-key solution EQ-VPC-MV. This is a vacuum pressure regulating system with motorized valve and gauge. It controls pressure range from 10^-6 torr ~ 760 torrs.
The standard vacuum fittings include:
  • A pair of stainless steel vacuum flange with KF-25 pump connector, two needle valves and one 1/4" Swagelok tube connector.
  • A 1000mm long KF-25 stainless steel vacuum bellows
  • Four KF-25 quick clamps
Gas Flow Meter
  • Three gas flowmeters ( 4% accuracy FS) are installed inside mobile case provide  a monitor to gas flowing rates.
    • 1) Compact direct read flow meter, 10-100 cc/min.
    • 2) Compact direct read flow meter, 16-160 cc/min.
    • 3) Compact direct read flow meter, 25-250 cc/min. 
  • One pressure meter is installed inside mobile cart for monitoring the pressure of the mixed gas.
  • Four stainless steel needle valve are installed in the front panel to control the gas route independently.

Front Panel
Back Panel
Gas Routes
Oxygen Monitoring An Oxygen Sensor can be used to monitor the oxygen level of gas(es) used in CVD systems for preventing or reducing oxidation. Please click the picture below to learn more:

Shipping Info
Product Dimensions
  • 80 mm O.D Tube Furnace:    550 x 500 x 700mm L x W x H 
  • Gas Mix Station: 600 x 600 x 700mm
  • Vacuum station: 600 x 600 x 700mm
New weight
450 lb (in total)
Shipping weight and Dimensions
Three pallets: 220 lbs with 48x40x42", 200 lbs eith 39x31x40: and 180lbs with 39x31x40" dimension.
One year limited warranty (Consumable parts such as processing tubes, O-rings, and heating elements
are not covered by the warranty, please order the replacement at related products below.)
Laptop, software & WiFi Control (Optional)
  • Brand new laptop with Microsoft Window 10 and Microsoft Office 2013 (30 days free trial) for immediate use.
  • Labview Based Temperature Control System (EQ-MTS01) enables user to edit temperature profile, manage heat-treatment recipe, record and plot data for MTI furnaces.
  • A wireless remote control provides up to 300 meters operating range.
  • Above features are available upon request at an extra cost (up to $1,000). Please contact us for more information.
  • Note: 
    The software is only compatible with MTI’s Yudian Temperature Controller


  • CE Certified
  • UL / MET / CSA Certification is available upon request, additional charges will apply
  • Temperature controller is MET and CE Certified
  • Transformer is UL Certified
Application Notes

Click here to learn more about the installation of a gas regulator.
Operation Instructions         

Related Products

Shopping Cart
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
Mailing Lists
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop

MTI-UCSD Battery Fabrication Lab

MTI Sponsors the Postdoctoral Awards

Upcoming Shows:
APS March Meeting 2019 March 4-8 Boston MA Booth 312

TMS 2019 March 10-14 San Antonio TX Booth 101

36th International Annual Battery Seminar & Exhibit Mar 25-28 Fort Lauderdale FL Booth 121

Recent Attended Shows:
2018 MRS Fall Meeting Nov 26-29 Boston MA

MS&T 2018 Oct 14-18 Columbus OH

Furnaces North America Oct 8-10 Indianapolis IN

Click here to see our past conferences


1. Prices listed online are valid for US market and whom pay by credit card only. There will be extra charges for shipping & handling. Price various from country to country.
2. We may add extra charges for paper order and net30 terms due to extra labor cost.
3. The prices listed are subject to change without notice.