|
|
Home Page
1800°C Vacuum and Tube Furnace (60mm OD) with Kanthal Super-1900 Heating Element - GSL-1800X-K60
|
|
In stock
Item Number: GSL1800X60
Personalization
Upgrade to Eurotherm 3000 series
|
GSL-1800X-K60 is a bench-top tube furnace with Kanthal Super-1900C Grade MoSi2 Heating Elements and high-quality alumina refractory board with ZrO2 liner. Vacuum sealing flanges with valves, a vacuum gauge, and a high-purity alumina processing tube (60mm O.Dx 1000mm L) are included for immediate use. The temperature of the GSL-1800X-K60 tube furnace is controlled by a 30-segment programmable high-precision SCR (Silicon Controlled Rectifier) digital controller with an accuracy of +/-1 ºC. This tube furnace has a max. working temperature up to 1800 ºC. It is widely used in material & chemical research labs to sinter all types of new material samples under vacuum and other gas conditions.
SPECIFICATIONS
|
Furnace Structure
|
- Double-layer steel casing with air cooling.
- Two cooling fans inside to keep case temperature < 60oC.
- High purity Alumina refractory chamber with 15mm thick 2500ºC grade YSZ ceramic liner for max energy saving.
- 99.8% purity Alumina tube made in the USA and comes with, a vacuum flange, gauge & valves are included.
|
|
Power Consumption
|
Max. 7KW
|
|
Input Voltage
|
Single Phase, 220V AC, 50/60 Hz (50A breaker required)
|
|
Max. Working Temperature
|
-
1750oC continuous
-
1800 oC Max. < 2 hours
|
|
Max. Heating / Cooling Rate
|
5oC / min ( T< 1600oC ); 2oC / min ( T>1600oC )
|
|
Heating Zone
|
300 mm
|
|
Constant Temperature Zone
|
100 mm +/- 5oC |
|
Heating Elements
|
Kanthal Super-1900 Grade MoSi2 - 330mm L, 8pcs, made in Sweden |
|
Temperature Controller
Temperature controller interface
The optional PC control module
Optional Eurotherm 3204
|
Standard temperature controller:
- Proportional–integral–derivative control (PID control) and auto-tune function
- 30 segments programmed with ramping, cooling, and dwelling steps
- Built-in over-temperature alarm and thermocouple failure alarm
- +/- 1 ºC temperature control accuracy
- Default DB9 PC communication port (PC control module and software are sold separately. See optional
Optional:
- MTS-02 PC control module (also including cable and software) is an add-on option for PC control.
- It is recommended to purchase the module together with the furnace. We install and test it before shipping.
- It is recommended to purchase the laptop (with software pre-installed) from us to avoid software conflict.
- Please note the module is not sold solely in the future.
- Eurotherm 3204 Temperature Controller is optional for an additional $1795 including installation and testing. This package also includes the communication cable (RS485 - USB) and software CD. Click here to view the full spec.
|
|
Tube Materials:
|
High purity Al2O3 ceramic, Purity > 99.8%
|
|
Processing Tube
|
- Premier Grade alumina tube made in the USA
- ID: 54mm x OD: 60 mm x 1000 mm length
- Four fibrous ceramic tube blocks are included for blocking heat radiation from the inside tube (Ceramic blocks must be fully inserted into the furnace chamber before heating).
-
 
|
|
Sealing Flanges
|
- One pair of sealing flange with double silicone high-temperature O-ring is included.
- Two SS needle valves and one dial vacuum gauge are installed with a flange for immediate use.
- Vacuum pressure can reach 50 mTorr by a quality mechanical vacuum pump and 10^-5 torr by a turbo molecular pump. Please click the picture below to see the flange assembly details.
|
|
Fitting Ports
|
- Standard 1/4‘’ Barbed fittings with needle valves.
- For supplying high-pressure gas, you may replace the standard barbed hose fitting with the 304SS 1/4" Swagelok® Tube Fitting, please click underlined to order.
- Optional: In order to increase the throughput and achieve high vacuum, you may replace the standard barbed hose fitting with the KF25 adapter, please click the underlined to order.
- Optional: You may also consider using the parts in below to increase the vacuum efficiency
  
|
|
Vacuum Level
|
- Limited by the vacuum pump
- 50 mtorr can be achieved by a mechanical pump
- 10^-5 torr can be reached by molecular pump
 
- The vacuum pump is not included, please order separately by clicking here
|
|
Power Cable & Plug
|
- 10 feet long 10-3 AWG heavy duty UL approved power cable is included. Extra length cable can be ordered by click picture below-left
- The plug is not included. You can order from your local hardware store according to female plug in your lab, or order from the link below right (30A plug)
|
| Dimensions |
590L x 490W ×760H, mm |
| Net Weight |
150Kg |
| Shipping Dimensions |
49"x40"x47" |
| Shipping Weight |
520lbs |
|
Warranty
|
One-year limited manufacturer warranty with lifetime support (consumable parts such as furnace liner, processing tubes, and O-rings are not covered by the warranty, please order replacements at related products below). |
|
Laptop, software & WiFi Control(Optional)
|
- Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial) for immediate use.
- Labview Based Temperature Control System (EQ-MTS01) enables users to edit temperature profiles, manage heat-treatment recipes, record, and plot data for MTI furnaces.
- A wireless remote control provides up to 300 meters of operating range.
- The above features are available upon request at an extra cost (up to $1,000). Please contact us for more information.
 
|
Compliance
|
- CE Certified
- NTTL or CSA certification is available upon request at the extra cost
|
Application Notes
|
|
Operation Instructions
|
 
Video: How To Set Up Furnace Video: Controller Operation
|
STANDARD PACKAGE
| Part NO. |
|
Quantity
|
|
| GSL68-01 |
Kanthal Super-1900 Grade MoSi2 - 330mm L
|
8
|
|
| GSL68-02 |
Flanges (include one pair of flanges with 1/4 rubber hose fittings and vacuum gauge. 4 pcs of vacuum O-Rings are included.)
|
1 set
|
|
| GSL68-03 |
|
1
|
|
| GSL68-04 |
99.8%High purity Al2O3 Ceramic (made in US)
|
1
|
|
| GSL68-05 |
|
4
|
|
| GSL68-09 |
|
1
|
|
OPTIONAL PARTS
|
Part No.
|
Description
|
Quick Link
|
|
EQ-KF-suite
|
KF-D25 series Vacuum Suite(vacuum pump, vacuum ball valve, vacuum bellows, quick clamps, KF adapter) Also you may buy individually.
|
|
| EQ-MTS02 |
Temperature Control System for controlling MTI's furnace by using a computer
|
|
|
EQ-CVM-211
|
Compact Digital Vacuum Gauge & Controller with Power Supply (Up to 10-4 Torr)
|
|
|
EQ-FM-Cart
|
Heavy Duty Mobile Car for All MTI Tube and Box Furnaces
|
|
| |
Gas mix station (Float flow meter / Mass flow meter) (2, 3, 4channels selectable) |
|
|
Vacuum flange fittings
|
|
| |
High vacuum station (Mechanical pump + turbo molecular pump.)
|
|
| |
Compact Flow Meter (float flow meter/mass flow meter)
|
|
|
Ceramic Boat/Crucible |
|
|
|
| | |
|
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed. | |
| | |
|
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop
MTI-UCSD Battery Fabrication Lab
MTI Sponsors the Postdoctoral Awards
Upcoming Shows:
|
|