|
|
Home Page
500ºC (18x18x18“, 91 Liter) Large Vacuum Oven with Vacuum Pump & Water Chiller - DZF-6090-HT
|
|
In stock
Item Number: DZF6090
Transported by LTL Freight (Truck)
|
DZF-6090-HT is a 500ºC high-temperature vacuum & atmosphere oven. The oven is equipped with two heating zones inside the heating chamber. Each heating mechanism is controlled by a discrete programmable temperature controller.
This floor-stand oven integrates a vacuum pump, recirculating water chiller, and gas flowmeter together for immediate use. Vacuum oven lowers dry temperature, prevents oxidation, and protects organic materials. It is the ideal oven for drying and annealing material as well as nanomaterial preparation.
SPECIFICATIONS
|
Power
|
- Single Phase 208~240 VAC 50/60 Hz.
- 2600 W with 20A breaker required
|
Structure
 
|
- The chamber is structured with stainless steel and welded to bracing pieces.
- Two racks of SS304 heating plate inside the vacuum chamber, which directly heat heats the chamber
- Warning: never directly put samples on the heating plate, please use a ceramic sheet or stainless tray to contain sample
- Chamber material: 1Cr18Ni9Ti stainless steel
- Chamber size： 18x18x18", （, 460x460x460 mm, 91 Liter, 3.4 Cubic Feet ）
- Height of upper heating zone: ~170mm, see pic on the left
- Height of lower heating zone: ~170mm, see pic on the left
|
Temperature Control
|
|
Vacuum Pump & Floating-Meter
|
|
Water Cooling
 |
- One Digital controlled Recirculating Water Chiller EQ-KJ5000 is included. (click Pic. left to see details)
- Refrigeration range: 5~35°C
- Flowing range: 16L/minute
- Coolant tank capacity: 6 Liter
- Use anti-corrosion coolant for the best performance.
|
| Warranty |
One-year limit warranty and lifetime support
|
| Certificate |
- CE Certification
- NRTL or CSA Certification is available upon request at extra cost.
-
   
|
Product Dimensions
|
 610 x 690 x 1350 mm (24" x 27" x 53") |
| Shipping Weight & Dimensions |
|
| Operation Manual |
|
| Application Notes |
- For accurate temperature measurement, you may do calibration by using the temperature calibrating kit.
- For more information on how to calibrate the oven temperature, please read the document How to calibrate the oven.
|
Attention
|
After heating the oven to a high temperature, the chamber will be dulled and discolored. They are normal phenomena and will not affect the performance of the oven. All samples inside the chamber should not have any contact with the chamber wall.
|
|
|
| | |
|
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed. | |
| | |
|
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop
MTI-UCSD Battery Fabrication Lab
MTI Sponsors the Postdoctoral Awards
Upcoming Shows:
|
|