|
|
Home Page
25T R2R Pressure Controlled Rolling Press ( 300mm Width) for Battery Electrodes - MSK-E2300B
|
|
In stock
Item Number: MSKE2300B
Transported by LTL Freight (Truck)
|
MSK-E2300B is an Automatic Battery Electrode Rolling Press System with precision digital pressure control in a compact footprint that is less than 6'x6'. It integrates tension controlled feeding and winding devices together with Pressure Controlled Electric Rolling Machine to achieve attention-free electrode rolling & pressing up to 75 meters long with the 300mm max-width. It is a perfect tool for building prototypes (e.g. pilot scale studies) of new generation rechargeable batteries to prepare electrode sheets at consistent and repeatable rolling conditions.
SPECIFICATIONS:
|
Working Voltage
|
|
|
Max. Power Consumption
|
|
|
Rollers (one pair)
|
- Dimensions: 200mm (Dia.) x 330mm (W)
- Material: Hardening Toll Steel with HRC 60-62
- Effective Rolling Width: <250mm
|
| Press gap |
- 0.050 - 1 mm adjustable by Dual micrometer knobs
- Tolerance: 0.003mm
|
| Motor & Rolling Speed |
- 550W AC motor with frequency controller
- 1 - 6 Meter /Minute adjustable by Touch Screen Control Panel
|
| Roller Surface Hardness |
- 60-62 HRC
- Never roll materials with hardness >50HRC
|
|
Press Planeness
|
±0.0025mm |
|
Pressure Control
|
- Pressure load: Max. 25Tons adjustable by Touch Screen Control Panel
- Real-time pressure displays with data recording function
  - The electrode edge slitting is avilbale upon request for for cyclindrical cell fabrication.
|
|
Rectifying Sensor
|
Built-in Rectifying Sensor to ensure neatly reeling electrode foil after pressing |
|
Compressed air
|
60psi required (Air compressor is not included. Please click here to order)
Attention: If a gas cylinder is used instead of an air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator.
 pic1  pic2
|
|
Rolling Unit Dimensions
|
- Rolling Machine: 1200mm(L) x420mm(W) x 800mm(H)
- The system with feeding & winding:
|
|
Compliance & Warranty
|
- MTI has granted the patent 201720537817.1& 201720534495.5 for the Roll to Roll Pressure Controlled Electric Rolling Machine MSK-E2300B since December 2017.
- NRTL or CSA certification is available upon request at the extra cost
- One-year limited warranty with lifetime support
- Rusting and damage due to improper storage condition or maintenance are not covered by warranty
|
|
Application Notes
|
- Never roll materials with hardness >50HRC
- Must use acetone to clean and dry rollers' surfaces after each use to avoid rusting
- Multi-step thickness calendering needed: While calendering the sample sheet, make each calendering decrement of 0.02mm comparing to sheet original thickness.
- Roll and press the electrode sheet multiple times to condense the slurry.
- Apply antitrust if the machine were to be unused for a long period of time
- Sample testing is available upon customer's request
- Pre-installed Edge Position Controller (EPC) used for controlling the edge position of film during winding,
- It is not allowed to use any MTI product in any hazardous location, especially prohibited from using in Class I environments (flammable gasses & vapor).
|
| Articles |
|
|
Operation Video
|
   
|
|
Net Weight
|
1000 kg (2200 lbs)
|
|
Shipping Weight & Dimensions
|
- Two Pallets
- 2020 lbs, 56"x48"x48"
- 810 lbs, 48"x40"x60"
|
|
|
| | |
|
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed. | |
| | |
|
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop
MTI-UCSD Battery Fabrication Lab
MTI Sponsors the Postdoctoral Awards
Upcoming Shows:
|
|