Browse Categories

Compact & Fast Gas Driven Crimper for CR20XX Series Coin Cells, Clean Room & Ar Glovebox Compatible - MSK-PN110-S

In stock
Item Number: MSK-PN110-S
Transported by LTL Freight (Truck)


Optional Die Sets
MSK-PN110-S is a compact crimper driven by compressed inert gas or air for various types of coin cells such as CR2016, CR2025, and CR2032. It provides more accurate pressure control to achieve high-quality crimping with better consistency, repeatability, and faster speed. Such a device is 1000 grade clean room compatible and it will satisfy the most demanding battery assembling environment. In contrast to the hydraulic crimper,  gas driven crimper is not going to contaminate glove box or clean room. 
It is much faster than manual hydraulic crimper and electric crimper.  can seal 500- 600 coin cell per hour, and easy to installed into the glovebox.

Please browse our disassembling variation for disassembling coin cell.  

Compressed Gas and Force
  • Manual Adjustable Sealing Force: <1.0 MPa ( 0.9MPa is recommended.)
  • Operation Pressure of Gas: 0.7 ~ <1.0MPa (Strict maximum)
Output Dimension
  • O.D +0.15mm after crimping (Original O.D 19.96mm, then output is about 20.11mm)
Die Set Material Hardened Steel
Die Set & Compatibility
  • Assembling dies for CR2016, CR2025 & CR2032 coin cells 
  • Option: assembling dies for CR12XX, 24XX, or AG are available upon request, please contact us for details
  • 100 pcs Coin cell cases (MTI's CR2032 cases) are included in the package for testing and immediate use
  • Spare crimping dies ( CR20XX, CR1220, CR23XX, CR24XX) can be ordered separately by clicking the 2nd picture on the left.
Measurement Accuracy ± 0.5%FS
Glove Box Compatibility    
  • A KF40 glovebox Feedthrough (with the necessay connector to gas cylinder) is included for connecting an inert gas source to the crimper inside the glove box.
  • A KF40 quick clamp feedthrough & quick clamp is included.
  • Gas inlet: 8mm O.D.  tube fitting
  • Gas outlet: 6mm O.D. tube fitting
  • 12mm O.D. tube to 8mm O.D. adapter is included
  • 3 Tube: 1.5m 8x5mm blue FR-PPR tube,  1.5mm 6x3mm blue FR-PPR tube,  2m 8x5mm clear PU tube.
Stroke Length 20mm +/- 0.1mm
Gas Comsumption 490ml/stroke
Clean Room Compatibility 1000 grade clean room compatible
Compressive Gas
  • Inert gas tank or air compressor (0.7~1Mpa) is needed for the machine operation, please purchase separately. 
  • When Operating Inside the Glovebox, High Purity Inert Gasses (Ar or N2) must be used
  • For the operation outside the glove box, you may use Air Compressor. (not included)
  • Attention: If a gas cylinder is used instead of air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator.
            pic1                pic2
Structure Heavy Duty Steel 
Product Dimensions
& Weight
  •                               Click picture for dimension
  • Net weight:                                      40 kg 
  • Shipping weight & Crating size:   115 lbs; 40"x30"x25"
Vacuum Pen
An Electric Vacuum Pen is included to pick round electrode disk to make assembling at ease.
Warranty One Year limited warranty with lifetime support (Rusted and damaged parts due to improper storage condition or maintenance are not covered by warranty)
Operation Instructions
Application Notes
  • Maintaince: Electrolytes are highly corrosive materials. Crimping dies must be cleaned with ethanol after each use to avoid corrosion and deformation.
  • Please browse our disassembling variation for disassembling coin cell.
  • Do not use air compressor when operating the unit in the glove box. Otherwise, air can flow inside and cause contamination. Use high purity inert (Ar or N2) gas instead. 
  • To avoid damaging the machine, the gas pressure must be lower than 1.0MPa (10 bars or 145 PSI).
  • Attention: Please use MTI Branded Coin Cell Cases with our crimper. We don't guarantee the crimping quality if other brand cells are used.

How to choose MTI crimper
  • MSK-110 is hydraulic manual  crimper. It is suitable use oteside glovebox at lower cost.   It is a little difficult to operate inside glovebox , and also may be risky on oil leaking for long time use
  • MSK-110-S  is driven by  inert gases, which is suitable for using inside glovebox with N2/Ar and with faster operation.
  • MSK-160E is driven by electric and  good for using in glovebox with N2/Ar.   but speed is a a little slow than MSK-110-S. It has compact size and can be transfered via air-lock chamber of glovebox.
  •    Msk-110                 MSK-110S          MSK-160E

Related Products

Shopping Cart
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
Mailing Lists
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop

MTI-UCSD Battery Fabrication Lab

MTI-VISTEC Cylindrical Cell  Pilot Line

MTI Sponsors the Postdoctoral Awards

MTI and Celgard have successfully reached the settlement under court for the litigation on patent and trademark

Upcoming Shows:

MS&T 2019 Sep 29 - Oct 3 Portland OR Booth 614

236th ECS Meeting Oct 13 - 17 Atlanta GA Booth 200

2019 MRS Fall Dec 1 - 6 Boston MA Booth 901

Recent Attended Shows:
ICT/ACT 2019 Jun 30 - July 4 Gyeongju South Korea

AABC 2019 Jun 24-27 San Diego CA

2019 MRS Spring April 22 - 26 Phoenix AZ

Click here to see our past conferences


1. Prices listed online are valid for US market and whom pay by credit card only. There will be extra charges for shipping & handling. Price various from country to country.
2. We may add extra charges for paper order and net30 terms due to extra labor cost.
3. The prices listed are subject to change without notice.