Browse Categories
Search

32-Position Hi-Throughput 10 mm I.D. Dry Pellet Pressing Set - Die10-S32


Please email for lead time
Item Number: Die10-S32
Die10-S32 is a High Throughput 32-position pressing set. It includes 32 pieces of 10mm ID pressing die, adapter plate, and demolding plate,  which allows the making of 32 dry pallets with different compositions in one single pressing within 30 minutes.
The adapter is compatible with YLJ-100M,  YLJ-100E, and YLJ-200E 
Hydraulic Press.

SPECIFICATIONS:
Pressing die installation schematic
    
  • To avoid the risk of accidents and damage to the Pressing Die, please read these instructions carefully before installation and before using it for the first time.
    1. Must Read the manual especially the die installation schematic before the operation.
    2. The operator must wear protective goggles.
    3. Must have Hydraulic Pellet Press equipped with the Protection Cover   
32-Position Adapter

  • Handle on both sides for easy carry
  • Holds a maximum of 32 pieces 10mm ID pressing dies
  • Use the provided pins to position the demolding for easy lining up.
Demolder
    
  • The specially designed demolding is used to de-mold 32 samples at the same time
  • Use the provided pins to position the de-molder for easy lining up.
Pressing die
  
  • Use for making 10mm dry pallets
  • Please click here for more details of the pressing die.
  • Please click the picture left to order spare die
Dimensions     
Maximum Load of a single die 5 metric Ton (at room temperature) 
630 MPa
The Hi-Throughput Pressing Die Set includes
  • 32 pieces 10mm ID pressing die:
    • One 10mm  I.D. core die 
    • Two pushing rods are highly polished and perfectly fitted into the die.
  • One 32-position adapter
  • One demolding plate
  • 3 pieces of the positioning pin
Compatible Hydraulic Press
(optional)
100T Manual  100T Electric     200T Electric

Cautions

  • WARNING:
    • DO NOT press flammable, corrosive, or explosive materials
    • The operator must wear a protection goggle.
  • Attention:
    • To achieve the best result, please ensure the volume of sample powder in all 32 pressing dies are the same.
    • Use ethanol to clean the pressing die before and after use every time
    • Use anti-rust oil after the operation and store it in a dry place to avoid rusting.
    • NO pressing powder with particle size LESS THAN 30 micron should be used. Small particles may slip into the gap between the pushing rod and steel sleeve and cause damages to the sleeve during the compression.
    • Ball mill or ground the powder to the size of 32~75 microns powder before pressing.
    • .

Instruction Video

                    

Steps to make a sample pellet
  • Mixing and grinding chemical powder by agate mortar or Ball Mill
  • Calcine mixed the powder in a high temp furnace under a suitable temperature
  • Crushing and Grinding calcined powder again by mortar or ball mill
  • Put calcined powder into the die
  • Pressing sample by a pressing machine under suitable pressure
  • Take out the pellet sample from die
  • Sintering the pellet under a suitable temperature in Oven
  • Then, a new material sample is formed!
Warranty
  • Pressing Dies are consumable products and are not covered by MTI's warranty.

Related Products


Pressing Die  1/8" - 3" 
Laboratory Mill & Mixer
Powder grinding & Mixing
Gravity Convection Ovens, Max. 300C
Drying Ovens

Calcining & Sintering

Hydraulic Press

CIP - Cold Isostatic Press

Related Products

Shopping Cart
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
Mailing Lists
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop

MTI-UCSD Battery Fabrication Lab

MTI Sponsors the Postdoctoral Awards


Upcoming Shows:

245th ECS Meeting May 26-30 San Francisco CA Booth 108

Hydrogen Tech Expo June 26-27 Houston TX Booth 567

2024 MRS Fall Meeting December 1-6 Boston MA Booth 901

AABC US December 9-12 Las Vegas NV

Click here to see our past conferences

 
Notices
1. Prices listed online are valid for the US market and who pay by credit card only. There will be extra charges for shipping & handling. Prices vary from country to country.
2. We may add extra charges for paper orders and NET 30 terms due to extra labor costs.
3. The prices listed are subject to change without notice.