|
Home Page
NIST Traceable Digital Convection Vacuum Gauge with Power Supply - Up to 1E-4 Torr - EQ-CVM-211-P-LD
|
In stock
Item Number: CVM211LD
|
The EQ-CVM-211 Stinger module provides the basic signal conditioning required to turn a convection vacuum gauge into a complete measuring instrument. A built-in display provides a convenient user interface for setup and operation of the vacuum gauge. Its platinum-plated tungsten sensor wire can resist most of aggressive gases such as H2S, Ammonia, HCl, etc. Note1: This is a NEW Anti-corrosive version, available since Dec. 2013 Note2: Update to KF16 Interface from Nov.09 2015
SPECIFICATIONS
Features
|
- Convection enhanced the Pirani vacuum gauge module with an on-board controller.
- Wide measurement range 10-4 to 1000 Torr.
- Bright LED digital display with measurement unit torr /mtorr
- Includes built-in digital display, set-point relay, analog output.
- Updated to KF-16 interface for Quick-Mount.
- 9 pins D connector and power supply adaptor is included
|
Input Voltage for Power Adaptor |
110V~220V, 1.1 m long cable Plug Type: Type A (US plug) Please use a plug converter to convert the plug type if used outside of the US. |
Working Voltage for the Gauge |
11 to 30 Vdc, protected against power reversal, transients, and over-voltages |
Output |
1) log-linear 1 to 8 Vdc , 1V/decade, or 2) non-linear analog S-curve 0.375 to 5.659 Vdc (Helix/GP compatible)
|
Measurement Range (signal) |
This gauge is calibrated for direct readout of nitrogen or air. Do not attempt to use with other gases such as argon (Ar) or carbon dioxide (CO2) unless accurate conversion data (provided in the User Manual) for N2 to other gas is properly used. |
Display |
3 digit LED (3 digits from 999 Torr to 10.0 mTorr), (2 digit LED from 9.9 mTorr to 1.0 mTorr), (1 digit LED from 0.9 mTorr to 0.1 mTorr)
|
Materials Exposed to Gases |
Platinum-iridium alloy
|
Operating Temperature |
0 to +40ºC
|
Digital Vacuum Gauge Dimensions |
|
Compliance |
- CE certified
- Traceable to NIST standards in accordance with ISO/IEC 17025
|
Optional Fitting Connection (Please click pic to order) |
- Quick Clamp with Rubber O-Ring for KF-D16 Vacuum adaptor
- M14 / 1/4 BSPP Male to KF-16 Adapter
|
Options |
- The vacuum gauge & controller can be connected with MTI flange easily. ( click Picture -left to see details), and click the picture below -middle to choose a vacuum flange
- Please click the picture below right to order a complete control system for a processing tube
|
Application Notes |
- One 12V 500mA Dc power and RS232 connector ( 9 pin D connector) is included and ready to use
- You must calibrate "Zero Point" under 10-4 Torr before measuring the vacuum system from 10-4 - 10-3 Torr, otherwise, the gauge may not display accurately in that range. For a detailed calibration procedure, please refer to the operation manual below.
- MTI can help customers finish the "Zero Point" calibration before shipping upon the customer's special request at an extra $100.
- Please consider using the EQ-PGC-554-LD for corrosive gases.
|
Operation Manual |
|
Weight |
136 g (4.8 oz) |
|
Sale Price: Starting at USD$29.95
|
Sale Price: Starting at USD$998.00
|
|
|
| | |
|
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed. | |
| | |
|
MTI sponsorships: MTI Sponsors Thermoelectrics Workshop
MTI-UCSD Battery Fabrication Lab
MTI Sponsors the Postdoctoral Awards
Upcoming Shows:
|
|