Browse Categories
Search

1/2" (12.7 mm) I.D. Graphite Pellet Pressing Die w/ Pushing Rods - EQ-Die-12D-GP


In stock
Item Number: DIE12DGP

Quantity Discounts

QuantityAmount
2 to 5USD$1,043.10
6 to 9USD$988.20
10 or moreUSD$933.30

EQ-Die-12D-GP graphite die is good for dry pellet pressing ceramic material at high temperature up to 1700 ºC.

SPECIFICATIONS:

Modle EQ-Die-12D-GP
Dimension           
Weight 1.3 Lbs

Whole set  pressing die includes
    • One 0.5"(12.7mm)  I.D. core die  made of   high purity & high strength graphite --made in Japan
    • One sleeve for core dies protection
    • Two pushing rods highly polished to ensure a perfect fit in the die.
    • One pressing pole for releasing the sample from die only.
    • Max. Working temperature:
      • 399ºC in air
      • > 400 ºC  need inert gas protection
    • Max. sustainable pressure is 50Mpa (~0.6 ton applied on the die)


    Steps to make sample pellet

    • Mixing and grinding chemical powder by agate mortar
    • Calcine mixed the powder in a high temp furnace under suitable temperature
    • Grinding calcined powder again by mortar
    • Put calcined powder into the die
    • Pressing sample by a pressing machine under suitable pressure
    • Take out pellet sample from die
    • Sintering the pellet under suitable temperature
    • Then, a new material sample is formed!
    Instruction Video
                                    
    Cautions
    • Please must always wear protection goggles during operation !!!
    • The pressing die cannot be used for pressing powder with particle size < 30 microns. Small particles may slip into the gap between pushing rod and steel sleeve and cause damages to the sleeve during the compression. Ball mill and sieve the powder and apply only the 32~75 microns powder to the pressing die to avoid the damages. Please consider using the 3'' Dia. Sieve Set No.200&450 Mesh to separate the 32~75 microns particles from the powder clumps. Please clean the mould via ethanol after the completion of each experiment.   (pic. 1)
    • You may use BN coating as mould release (Pic 2)
                     Pic 1Pic 2
    • Please use alcohol to clean the pressing die every time before use and store it in a dry place

    Related Products

    Shopping Cart
    Your cart is empty.
    Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
    Mailing Lists
    MTI sponsorships:
    MTI Sponsors Thermoelectrics Workshop

    MTI-UCSD Battery Fabrication Lab

    MTI-VISTEC Cylindrical Cell  Pilot Line

    MTI Sponsors the Postdoctoral Awards

    Announcement:
    MTI KJ Group Files Lawsuit Against Shangdong Gelon LIB Group for Copyright Infringement of MTI products and Manufacture & sale of counterfeit goods 

    MTI and Celgard have successfully reached a settlement under court for the litigation on patent and trademark


    Upcoming Shows:


    Recent Attended Shows:
    IMAT Virtual Edition October 26 - 28

    TMS 2020 Feb 23 - 27 San Diego CA Booth 700


    AABC Europe Jan 12 - 16 Wiesbaden Germany


    Click here to see our past conferences

     

    Notices
    1. Prices listed online are valid for the US market and who pay by credit card only. There will be extra charges for shipping & handling. Price various from country to country.
    2. We may add extra charges for paper order and net30 terms due to extra labor costs.
    3. The prices listed are subject to change without notice.