Browse Categories
Search

Floor-Stand Fume Hood with Lamp & Blower with optional Carbon-filtered Enclosures, 60"Wx 24"Dx 48"H, EQ-FH-60


In stock
Item Number: FH60
The floor-stand EQ-FH-60 fume hood provides a working space that minimizes the chance of damages from a hazardous situation. The fume hood is equipped with tempered glass with an anti-shattering film, centrifugal fan, and vapor-proof low-voltage LED light.  It is an ideal fume-hood for the material research lab to handle flammable or corrosive gasses. It is a 68-inch wide platform that can accommodate large three-zone tubing furnaces.

SPECIFICATIONS

Fume Hood Features & Dimensions

  • Ducted type fume hood
  • Steel frame with tempered glass front panel
  • Anti-shattering film on front glass panel: the film holds shattered glass in place to minimize damage from broken glass.
  • The round side door on each side for easy access to the flange on the furnace.
  • Chemical-resistant laminate platform
  • Fire retardant Compact Grade Laminate plates (Rear & side)
  • Blow Rate:  1995 M³/ hour = 33 M³/minute = 1165 CF/minute
Power Requirement
    • 110V 60Hz
    • 220V +/-10% Single Phase configuration is available at extra cost (>300W transformer is needed)
    Blower
    • Inline Centrifugal blower (ETL Listed)
    • Flow Rate:           CFM: 780
    • Speed:                 RPM: 2480
    • Power:                 110V, 2.1Amps
    • Fan Diameter:      10 inch
    Option function of Blower
    • Speed Control for the blower is available at extra cost
    Accessories

    • Two Power Plugs are installed inside the hood
    • Low-voltage, spark-free LED vapor-proof light
    • 10" hose port   ( hose pipe is not included )
    Option Accessories
    • Please contact us to order option Inline carbon filter to maintain a safe laboratory environment.
    • Compact design carbon filter, leave enough room to operate inside the fume hood. (30 inches height remain to operate from the bottom of the fume hood )
    •         
    Dimensions
    • Overall dimension: 68"W x 32"D x 57"H
    • Shipping weight 555 lbs with dimensions of 75"x45"x85"
    Compliance

    • MET Certification is available upon request at extra cost, please contact our sales representitives for a price quote. Certify standards include: 1) Induction heater: UL61010-1 & UL499; 2) Vacuum Pump: UL1450; 3) Water Chiller: UL61010 & UL1995  
    Warranty
    Two years limited with lifetime support.
    Operation Instructions
    Application Note
    • If your lab required to reduce the airflow needed, you may need to limit the door height (sash height for example 18") during operation. Please email us before ordering, we could add a height limit for the fume hood. Work at proper Window Sash Height. The full personal protection provided at this opening blower cuts out with a lowered window.
    • We suggest accommodating CVD or hydrogen furnace with a fume hood.
    • Please email us for more information of Floor Mounted Fume Hoods/Walk-In Fume Hoods.
                
    Related Product
    For a space-saving solution, please have a look at FH-36, our bench-top fume hood.
        fume hood with tube furnace 2

    Related Products

    Shopping Cart
    Your cart is empty.
    Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
    Mailing Lists
    MTI sponsorships:
    MTI Sponsors Thermoelectrics Workshop

    MTI-UCSD Battery Fabrication Lab

    MTI Sponsors the Postdoctoral Awards


    Upcoming Shows:

    2024 MRS Fall Meeting December 1-6 Boston MA Booth 901

    AABC US December 9-12 Las Vegas NV Booth 812

    Click here to see our past conferences

     
    Notices
    1. Prices listed online are valid for the US market and who pay by credit card only. There will be extra charges for shipping & handling. Prices vary from country to country.
    2. We may add extra charges for paper orders and NET 30 terms due to extra labor costs.
    3. The prices listed are subject to change without notice.