Automatic Mounting Press upto 200C and 2.3 T for SEM & Metallographic Samples - EQ-HXQ-50

• 220VAC 50Hz or 60Hz (Please specify frequency upon purchasing)
• For AC 110V power supply please order a 1500W voltage transformer
  
• 1200W (10A air breaker required)

• Four sets of mounting dies are included with an ID of 25, 30, 40, and 50 mm,  which can make two samples simultaneously. ( see video bottom)
• Each Die Set includes:
• Die Sleeve: OD 60 mm, Height ~135 mm
• Upper Pressing Rod: Height ~26 mm
• Lower Pressing Rod: Height ~26 mm
• Separating Plate: Height: 8 mm

Control Panel

• 5" Touch Screen Digital control for setting parameters:
• Temperature:                  100 - 200^oC  programmable with +/-1°C accuracy 
• Heating and dwell time:   1 - 999 minutes
• Loading:                           200 -  2306 kg  ( via 2 metric Ton electric hydraulic press )
• Pressure:  depended on mounting die diameter
• Max.  470  Bar for 25 mm die
• Max:  326 Bar for 30 mm die
• Max.  183 bar for 40 mm  die
• Max.  118 Bar  for 50 mm die
• 4 sets of mounting dies are included with 25 mm, 30 mm, 40 mm, and 50 mm
• Custom

Water Cooling

• Chilled water inlet and outlet is included. 
• Recirculating chilled water is recommended to reduce the cooling time to about 10 minutes. 
• Water Chiller KJ5000 is optional. 

Machine Dimension

Compliance

• CE Markered
• NRTL certification is available upon request at an extra cost

Machine Net weight

200 Lb.

Shipping Weight & Dimensions

• 250 lbs
• 40" x 30" x 28"

Optional

Please order Compression Mounting Powder (5 Lb) in optional colors of Black, Red, and Green - EQ-HM-Powder5L at the related product below