|
|
Home Page
Lithium Chip 16 Dia x 0.6/1.0 thick ( mm) for Li-ion Battery R&D, 300pcs / bottle - EQ-Lib-LiC
|
|
Hazardous Material; Ship within the Continental US and via UPS Ground only.
Product Options
| Please select the thickness: |
|
|
Lithium chip is widely used for Li-ion and Li metal rechargeable battery R&D, Please click the link below to see a paper published in Nature Communication" which uses MTI metal foil:
High rate and stable cycling of lithium metal anode
by Jiangfeng Qian, Wesley A. Henderson, Wu Xu, Priyanka Bhattacharya, Mark Engelhard, Oleg Borodin & Ji-Guang Zhang
SPECIFICATIONS:
| Purity |
99.9% Lithium |
| Melting Point |
180.5 °C |
| Density |
|
| Color |
|
Dimension
|
- 16 mm x 0.6 mm (diameter x thickness)
- 16 mm x 1.0 mm (diameter x thickness)
- Please select the thickness from the product options
|
| Net Weight |
- 20g/bottle (around 300 pcs/ bottle)
|
| Sealing |
- Chip sealed in Al can which is vacuum-sealed in Al bag
|
| Use |
- Clean the surface of the lithium foil using a nylon brush/stainless steel scalpel until a shiny silvery surface appears (inside an argon glovebox).
|
Shipping Limitations
|
- Shipments of lithium foil are described as “UN 1415, Lithium, 4.3, PG I".
All shipments are Hazard Class 4.3 and require “Dangerous when wet” labels.
Sea Class 4.3 (IMDG)
Road, Rail Class 4.3 11a (RID/ADR)
|
| Safety Data Sheet |
 |
| Operation |
- The package must be open inside a glove box with Argon Gas and moisture less than 2%RH.
|
Notes
 |
- MTI only sells Li chips within the USA and does not accept international orders due to restrictions on hazard material
- MTI reserves the right to charge an additional handling fee due to special shipping/handling requirements.
- Operation and Storage: Lithium is very active in the air, please carefully read the SDS carefully.
- Lithium chips may be oxidized during handling and storage. if you find any oxidation on the surface of the Li-chip, please use sandpaper to remove it before using it.
- The lithium chips were packed in the dry room with < 2%RH. Therefore, a slight increase of O2 PPM level might be seen in the glove box when the can is opened. Please keep purging the glove box with ultra-high purity Ar until the required O2 PPM level is reached.
|
|
|
|
Sale Price: Starting at USD$598.00
|
Sale Price: Starting at USD$998.00
|
Sale Price: Starting at USD$249.00
|
|
|
|
|
|
|
|
| | |
|
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed. | |
| | |
|
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop
MTI-UCSD Battery Fabrication Lab
MTI Sponsors the Postdoctoral Awards
Upcoming Shows:
|
|