Browse Categories

Split-able Pouch Cell with Optional Size for Battery R&D - EQ-SPC-Series

Sale Price: Starting at USD$900.00
If you are international, please click this.

Product Options

Max Electrode Dimension:

EQ-SPC-Series are splittable pouch cells made of Nylon or Peek, which are designed for testing pouch cell with max electrode dimension of different size. Its detachable design allows you to test the pouch cell behavior as well as structural changes of electrode easily, quickly and cost effectively.

Design Fearture
  • Easy assembling by only four cap mounting screws
  • Easy to separate after test for microstructure analysis
  • Space saving, compact design allows you put it into the glove box
(Please select at options bar)
    • Nylon or PEEK (Poly Ether Ether Ketone) selectable from product options bar
    • Body: Electrolyte corrosive-proof Nylon which can sustain with temperature up to 80ºC  and O-ring: Sealed by electrolyte corrosive-proof PTFE O-rings
    • Body: PEEK (Poly Ether Ether Ketone), which is a semicrystalline thermoplastic with excellent mechanical and chemical resistance properties that are retained to high temperatures and O-ring: Sealed by electrolyte corrosive-proof FKM O-rings
    Appearance EQ-SPC-654519 EQ-SPC-804019 EQ-SPC-955208 EQ-SPC-30529525
    Inside chamber Dimensions

    (Customized size pouch cell are available upon request)
    • 65 mm H  x  45mm W x19 mm Thick
    • 80 mm H  x 40mmW x 19 mm Thick
    • 95 mm H  x  52mm W x 8 mm Thick
    •  305 mm H  x  295.5 mm W x 25.4 mm Thick  
    Suggested Max. electrode area
    • 60mm H x 40 mm
    • 75 mm H x 35 mm
    • 80mm H x 50mm 
    • 300mm H x 395mm 
    Outside Case Dimensions
    • 89 mm H x 75 mm W x 53 mm Thick
    • 93 mm H x 85 mm W x  55 mm Thick
    • 120mm H x 85 mm W x 40mm Thick
    • 317.5 mm H x 323 mm W x 86 mm Thick  
    • One digital pressure gauge installed on top to monitor pressure.  You may remove the gauge and use 1/4 female port to inject electrolyte into the pouch cell
    • Two stainless steel contacts to connect anode and cathode by the screw.
    • Max. working temperature::  80°C.for Nylon, and 120oC for PEEK
    • Max.workingPresssure:        36psi (0.25MPa) for Nylon and 60psi (0.4Mpa) for PEEK
    Application Note
      • In order to make metal air pouch cell, you can drill holes in the case. We can help you do that at extra cost
      • You may use MTI die cutter to prepare electrode via layer by layer or make winding type pouch cell electrode ( click picture below to see the machine
      • You may need an ultrasonic welder to welding electrode tape  to connect to the split cell
                  Die cutter         Ultrasonic Welder            Winding Machine           Pre-coated Electrodes                Other split cells

    Related Products

    Shopping Cart
    Your cart is empty.
    Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
    Mailing Lists
    MTI sponsorships:
    MTI Sponsors Thermoelectrics Workshop

    MTI-UCSD Battery Fabrication Lab

    MTI Sponsors the Postdoctoral Awards

    Upcoming Shows:
    2019 MRS Spring April 22 - 26 Phoenix AZ Booth 501

    AABC 2019 Jun 24-27 San Diego CA Booth 32

    ICT/ACT 2019 Jun 30 - July 4 Gyeongju South Korea

    Recent Attended Shows:
    36th International Annual Battery Seminar & Exhibit Mar 25-28 Fort Lauderdale FL

    TMS 2019 March 10-14 San Antonio TX

    APS March Meeting 2019 March 4-8 Boston MA

    Click here to see our past conferences


    1. Prices listed online are valid for US market and whom pay by credit card only. There will be extra charges for shipping & handling. Price various from country to country.
    2. We may add extra charges for paper order and net30 terms due to extra labor cost.
    3. The prices listed are subject to change without notice.