1000C Mini Tube Furnace with 20 mm Quartz Tube and Vacuum Sealed Flange - GSL-1000X-20-LD

• Furnace input  50VAC, 500W max. 50/60 HZ
• Included a transformer (110/220V - 50V) to run a single furnace under either 110V or 220VAC
• May connect two furnaces in series to run at 110VAC

Working Temperature

• Max. Temperature: 1000 °C  (< 1 hr)
• Continuous working temperature: 900°C
• Max. Heating Rate: 10°C /min

• Heating Zone Length: 2.16" ( 55mm)
• Constant Temperature Zone: 0.8" (20mm. +/-  5ºC)

Temperature Controller

• PID automatic control and auto-tune function
  
• 30 programmable segments for precise thermal processing
• Built-in protection for the over-heated and broken thermocouple.
• Temperature Accuracy: +/- 1 °C
• K type thermocouple

Heating Elements

• Fe-Cr-Al Alloy doped by Mo

• Fused quartz tube:  20 mm OD  x 17 mm ID x 192 mm Length is included
• Two fibrous ceramic tube blocks are included for blocking heat radiation generated from tube center. (Ceramic blocks must be fully inserted into the furnace chamber before heating).
•         Click here to choose a crucible

Vacuum Pressure

• 20 m torr can be achieved by the mechanical pump
• Please click the picture below to order vacuum pump
      

Dimensions

Shipping Weight

50 lbs

Warranty

• The furnace is separable with controller  and easy to replace
• The furnace can be used as vertical position as the picture below
• The furnace is small enough to put into glovebox through airlock chamber
•                

• A special made protective shield can be mounted on the furnace for scald protection at an extra cost.
• If the furnace will be used for a long period of time at high temperature (800°C+), it is recommended to install the protective shield to avoid scalding accidents.
• Please contact us for more details.
•